--- title: "Stacking NS9600 Sensors" slug: "stacking-ns9600-sensors" tags: ["Hardware"] updated: 2026-11-19T12:43:24Z published: 2026-11-19T12:43:24Z canonical: "docs.trellix.com/stacking-ns9600-sensors" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Stacking NS9600 Sensors The NS9600 Sensor currently offers the solution of stacking two Sensors to achieve scalability. The individual Sensors in the stack are interconnected using external stacking cables. Stacking Sensors creates a unified data plane view across the stack. This allows the Manager to manage the stack as a unified device. In a stack, some of the Sensor properties like signature set and call back detector update etc. are managed at the stack level and remaining like port configuration, troubleshooting etc. are managed at the device level. Even though the data plane is unified, some Sensor properties are managed at individual Sensor level from the Manager. Each Sensor in the stack has an independent connection to the Manager. The Manager interprets the stack as a collection of individual Sensors by creating a container entity called the stack. Based on the requirement, you can combine multiple capacity licenses (20 Gbps, 40 Gbps, or 60 Gbps) to meet the total throughput requirement of the stack. Total throughput requirements depend on the node count: - A 2-node stack requires a total capacity of 120 Gbps. - A 3-node stack requires a total capacity of 180 Gbps. - A 4-node stack requires a total capacity of 240 Gbps. - A 5-node stack requires a total capacity of 300 Gbps.