--- title: "Standalone Manager upgrade on MLOS" slug: "standalone-manager-upgrade-on-mlos-1" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:23Z published: 2026-11-19T12:54:23Z canonical: "docs.trellix.com/standalone-manager-upgrade-on-mlos-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Standalone Manager upgrade on MLOS Trellix recommends that you regularly monitor for maintenance releases and new versions of the Manager software. To know whether the new version of the Manager is applicable to Linux appliances, see the specific version of Trellix Intrusion Prevention System release notes. The Linux based Manager upgrade file contains Manager software upgrade file bundled with MLOS upgrade patch. On executing the Linux based Manager upgrade file, the MLOS and the Linux based Manager application are upgraded simultaneously. **Pre-requisites:** 1. Make sure you have a Linux machine installed in your network. 2. You must download the Manager upgrade file (setup.bin) from the [Download Server](https://www.trellix.com/downloads/my-products/) and save it in the Linux machine, If you are upgrading from 10.1.7.4 Linux based Manager versions. > [!NOTE] > Note > > Make a note of the location where the upgrade file is saved in the Linux machine. 3. You must download the Manager upgrade file (setup.bin) from the [Download Server](https://www.trellix.com/downloads/my-products/) and save it in the Linux based Manager server when using `install the setup present on local machine` upgrade in 10.1.7.7 or higher Linux based Manager versions. > [!NOTE] > Note > > Make a note of the location where the upgrade file is saved in the Manager server. 4. You must download the Manager upgrade file (setup.bin) from the [Download Server](https://www.trellix.com/downloads/my-products/) and save it in the Linux machine, when using `scp setup from remote machine and install` upgrade in 10.1.7.7or higher Linux based Manager versions. > [!NOTE] > Note > > Make a note of the location where the upgrade file is saved in the Linux machine. ### Scenario 1: If you are upgrading from Manager versions 11.1.7.84 to 11.1.7.136.2 1. Log on to the restricted shell of Manager Appliance using the default username and password. 2. Execute the following command to upgrade the Manager. ```plaintext upgrade ``` 3. After executing the above command, the Manager instance prompts the following options: ```plaintext Choose one of the below options 1: scp setup from remote machine and install 2: install the setup present on local machine Input [1] or [2] : ``` > [!NOTE] > Note > > If you select `1: scp setup from remote machine and install`, you must have the Linux based Manager upgrade file saved in a remote Linux machine. > [!NOTE] > Note > > If you select `2: install the setup present on local machine`, you must have the Linux based Manager upgrade file saved in the Linux based Manager itself. 6. If you select 1, continue with the following steps, else skip to step 7. 1. You are prompted to provide your SCP server IP address: ```plaintext Enter the IP of the remote machine: ``` Type the SCP server IP address and press `Enter`. 2. You are prompted to provide your username for the SCP server. ```plaintext Enter the user of the remote machine: ``` Type your username for the SCP server and press `Enter`. 3. You are prompted to provide the filepath of Manager upgrade file in the SCP server. ```plaintext Enter the setup file's path as on remote machine: ``` Type filepath for the upgrade file in SCP server and press `Enter`. 4. When you are prompted to provide the MariaDB root password, type your database root password and press `Enter`. By default, the MariaDB root password is `root123`. > [!WARNING] > Important > > After providing the MariaDB password, you will not be able to proceed with the upgrade process if you have configured any M-series Sensor in the Manager. The following error message is displayed: > > ```plaintext > =============================================================================== > Enter Database Root password > ---------------------------- > > Please enter Database Root password : > > =============================================================================== > Upgrade Failure > --------------- > > Manager version 11.1.7.x will not support M-series devices. > > The upgrade cannot continue.  Please ensure all M-series devices have been > removed and restart the upgrade. > > Please see the "SensorModel.log" file that has been placed on your /opt/apps > for the list of M-series devices attached to your Manager. > > PRESS TO ACCEPT THE FOLLOWING (OK): > Manager@MLOS-NSM1> dbShell > ``` > > To continue with the upgrade process, disconnect any M-series Sensors configured in the 10.1 Manager. > [!WARNING] > Important > > - You can generate configuration reports for a selected M-series Sensor for future reference from **Manager** → **** → **Reporting** → **Configuration Reports** → **IPS Sensor**. For more information, see [Generate IPS Sensor reports](/network-and-platform/docs/generate-ips-sensor-reports) in Trellix Intrusion Prevention System 11.1.x Product Guide. > - A list of all M-series Sensors are provided in **SensorModel.log** file on `/opt/apps`. To view the complete domain path for the required M-series Sensors, go to **Devices** → **** → **Global** → **Device Manager**. Select the required M-series Sensor from **Sensors** tab and view the domain details from **Owner Domain** column. By default, the **Owner Domain** column is not enabled. To enable it, go to **Device Details** drop-down and select **Columns** → **Device Details** → **Owner Domain**. 5. After completing the upgrade procedure, check the Manager version using `show managerVersion` command to ensure successful upgrade. 6. Reboot the Linux based Manager by executing `reboot` command. 7. If you select 2, do the following. 1. You are prompted to provide filepath of the upgrade file in the Linux based Manager server: ```plaintext Enter the path to the setup.bin file: ``` Type the filepath of the upgrade file in the Linux based Manager server and press `Enter`. 2. When you are prompted to provide the MariaDB root password, type your database root password and press `Enter`. By default, the MariaDB root password is `root123`. > [!WARNING] > Caution > > After providing the MariaDB password, you will not be able to proceed with the upgrade process if you have configured any M-series Sensor in the Manager. The following error message is displayed: > > ```plaintext > =============================================================================== > Enter Database Root password > ---------------------------- > > Please enter Database Root password : > > =============================================================================== > Upgrade Failure > --------------- > > Manager version 11.1.7.x will not support M-series devices. > > The upgrade cannot continue.  Please ensure all M-series devices have been > removed and restart the upgrade. > > Please see the "SensorModel.log" file that has been placed on your /opt/apps > for the list of M-series devices attached to your Manager. > > PRESS TO ACCEPT THE FOLLOWING (OK): > Manager@MLOS-NSM1> dbShell > ``` > > To continue with the upgrade process, disconnect any M-series Sensors configured in the 10.1 Manager. > [!WARNING] > Important > > - You can generate configuration reports for a selected M-series Sensor for future reference from **Manager** → **** → **Reporting** → **Configuration Reports** → **IPS Sensor**. For more information, see [Generate IPS Sensor reports](/network-and-platform/docs/generate-ips-sensor-reports) in Trellix Intrusion Prevention System 11.1.x Product Guide. > - A list of all M-series Sensors are provided in **SensorModel.log** file on `/opt/apps`. To view the complete domain path for the required M-series Sensors, go to **Devices** → **** → **Global** → **Device Manager**. Select the required M-series Sensor from **Sensors** tab and view the domain details from **Owner Domain** column. By default, the **Owner Domain** column is not enabled. To enable it, go to **Device Details** drop-down and select **Columns** → **Device Details** → **Owner Domain**. 3. After completing the upgrade procedure, check the Manager version using `show managerVersion` command to ensure successful upgrade. 4. Reboot the Linux based Manager by executing `reboot` command. > [!NOTE] > Note > > The default Manager root directory for App, MariaDB, and Solr will be moved from `/opt/NetworkSecurityManager` to `/opt/IPS Manager`. In such scenarios, you will be prompted with this directory change in the console. ### Scenario 3: If you are upgrading from Manager versions 10.1.7.4 to 10.1.7.7 1. Log on to the restricted shell of Manager Appliance using default username and password. 2. Stop the Watchdog service by executing `watchdog stop` command. 3. Stop the Manager service by executing `manager stop` command. 4. Execute the following code block to upgrade the Manager. ```plaintext upgrade ``` Following are the input parameters required for the restricted shell command: | Parameter | Description | | --- | --- | | `Username` | Login username for the Linux machine where the Manager upgrade file is saved. | | `Linux_machine_ip` | IP address of Linux machine where you have saved the upgrade file. | | `File_path_of_the_upgrade_file` | File path for the upgrade file in the Linux machine. | 5. After executing the above command block, the Manager instance prompts a question: ```plaintext Are you sure you want to continue connecting (yes/no)?         ``` Type `yes` and press `Enter`. 6. You are prompted to provide the Linux machine password. ```plaintext admin@w.x.y.z's password: ``` Type password for the user account and press `Enter`. 7. You are prompted to provide your Linux based Manager shell password. ```plaintext [sudo] password for admin: ``` Type password for the Manager. By default, the password for Manager shell is `MLOSnsmApp` for Manager and `MLOSnscmApp` for Central Manager. 8. When you are prompted to provide the MariaDB root password, type your database root password and press `Enter`. By default, the MariaDB root password is `root123`. > [!WARNING] > Important > > After providing the MariaDB password, you will not be able to proceed with the upgrade process if you have configured any M-series Sensor in the Manager. The following error message is displayed: > > ```plaintext > =============================================================================== > Enter Database Root password > ---------------------------- > > Please enter Database Root password : > > =============================================================================== > Upgrade Failure > --------------- > > Manager version 11.1.7.x will not support M-series devices. > > The upgrade cannot continue.  Please ensure all M-series devices have been > removed and restart the upgrade. > > Please see the "SensorModel.log" file that has been placed on your /opt/apps > for the list of M-series devices attached to your Manager. > > PRESS TO ACCEPT THE FOLLOWING (OK): > Manager@MLOS-NSM1> dbShell > ``` > > To continue with the upgrade process, disconnect any M-series Sensors configured in the 10.1 Manager. > [!WARNING] > Important > > - You can generate configuration reports for a selected M-series Sensor for future reference from **Manager** → **** → **Reporting** → **Configuration Reports** → **IPS Sensor**. For more information, see [Generate IPS Sensor reports](/network-and-platform/docs/generate-ips-sensor-reports) in Trellix Intrusion Prevention System 11.1.x Product Guide. > - A list of all M-series Sensors are provided in **SensorModel.log** file on `/opt/apps`. To view the complete domain path for the required M-series Sensors, go to **Devices** → **** → **Global** → **Device Manager**. Select the required M-series Sensor from **Sensors** tab and view the domain details from **Owner Domain** column. By default, the **Owner Domain** column is not enabled. To enable it, go to **Device Details** drop-down and select **Columns** → **Device Details** → **Owner Domain**. 9. After completing the upgrade procedure, check the Manager version using `show managerVersion` command to ensure successful upgrade. 10. Reboot the Linux based Manager by executing `reboot` command. > [!NOTE] > Note > > The default Manager root directory for App, MariaDB, and Solr will be moved from `/opt/NetworkSecurityManager` to `/opt/IPS Manager`. In such scenarios, you will be prompted with this directory change in the console.