--- title: "Stateless Scanning Exceptions" slug: "stateless-scanning-exceptions-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/stateless-scanning-exceptions-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Stateless Scanning Exceptions The Scanning exceptions feature bypasses the scanning of traffic from a configured VLAN, TCP, or UDP port. The scanning exceptions configurations that are defined can be enabled or disabled at the Sensor level. > [!NOTE] > Note > > Scanning exception feature rules are applied to both the Sensors in a fail-over pair. On creating a fail-over pair, the template Sensor rules are copied to the peer Sensor. Scanning Exceptions feature is supported only in the following Sensor models: - NS9600 - NS9500 - NS9300 - NS9200 - NS9100 - NS7350 - NS7250 - NS7150 - NS7300 - NS7200 - NS7100 - NS5200 - NS5100 - NS3200 - NS3100 > [!NOTE] > Note > > NS3500 Sensors do not support Scanning Exception feature. > [!NOTE] > Note > > Scanning exceptions rules can be configured on ports running in inline mode. Once set, these rules take precedence over Firewall access rules. Fail-over ports cannot be configured for scanning exceptions.