--- title: "stats alarm" slug: "stats-alarm" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/stats-alarm" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # stats alarm Specifies the configuration for performance-based alarms. Use the `no` form of this command to disable performance-based alarms. ### Syntax `stats alarm {cpu_util_indiv | disk_io | fs_mnt | intf_util | memory_pct_used | paging} {clear | enable | event-repeat | falling | rate-limit | rising}` `stats alarm {cpu_util_indiv | disk_io | fs_mnt | intf_util | memory_pct_used | paging} {falling | rising} {clear-threshold value | error-threshold value} percent-utilization` `stats alarm {cpu_util_indiv | disk_io | fs_mnt | intf_util | memory_pct_used | paging} {clear | enable | event-repeat | falling | rate-limit | rising} rate-limit count {long | medium | short} count` `stats alarm {cpu_util_indiv | disk_io | fs_mnt | intf_util | memory_pct_used | paging} {clear | enable | event-repeat | falling | rate-limit | rising} rate-limit window {long | medium | short} seconds` `stats alarm {cpu_util_indiv | disk_io | fs_mnt | intf_util | memory_pct_used | paging} {clear | enable | event-repeat | falling | rate-limit | rising} rate-limit reset` ### Parameters `cpu_util_indiv` Displays average CPU utilization too high (percent utilization). `disk_io` Disk I/O per second too high (kbytes/second). `fs_mnt` Free file system space too low (percent of disk space free). `intf_util` Network utilization too high (bytes/second). `memory_pct_used` Too much memory in use (percent of physical memory used). `paging` Displays paging activity and paging faults. `clear` Clears all the current state information for the specified alarm (available in Enabled mode). `enable` Enables the specified alarm (all alarms are enabled by default). `falling clear-threshold` Clears the alarm when the threshold falls to the specified level. `rising clear-threshold` Clears the alarm when the threshold rises to the specified level. `falling error-threshold` Sets the alarm when the threshold falls to the specified level. `rate-limit reset` Clears the current rate-limit counts for the specified m in Enabled mode). `event-repeat` Configure repetition of events from this alarm. `rising error-threshold` Sets the alarm when the threshold rises to the specified level. `rate-limit count {long | medium | short} count` Specifies the maximum number of alarms allowed for the specified metric in the long, medium, and short time periods (windows). The default counts are 50, 20, and 5 for each metric. `rate-limit reset` Clears the current rate-limit counts for the specified metric (available in Enabled mode). `rate-limit window {long | medium | short} seconds` Specifies the number of seconds in the long, medium, and short time periods (windows) for the specified metric (used to limit the number of alarms). The default windows are 7 days, 24 hours. ### Example The following example sets the alarm threshold for CPU utilization at 80%. ``` hostname (config) # stats alarm cpu_util_indiv rising error-threshold 80 ``` ### Supported appliances **Endpoint Security (HX):** Release 2.5