--- title: "status" slug: "status-4" tags: ["Certification", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/status-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # status The `status` command shows Sensor system status, such as System Health, Manager communication, signature set details, total number of alerts detected, and total number of alerts sent to the Manager. This command has no parameters. **Syntax:** `status` **Sample Output:** For Sensor, the output is as shown: `intruShell@NS3200_FIPS> status` `[Sensor]` `System Initialized : yes` `System Health Status : good` `Layer 2 Status : normal (IDS/IPS)` `Installation Status : complete` `IPv6 Status : Dont Parse and Allow Inline` `Reboot Status : Not Required` `Guest Portal Status : up` `Hitless Reboot : Available` `Last Reboot reason : unknown` `[Signature Status]` `Present : yes` `Version : 11.10.10.5` `Power up signature : good` `Geo Location database : Present` `DAT file : Present` `DAT file Version : 3756.0` `[Manager Communications]` `Trust Established : yes (Self Signed cert support)` `Alert Channel : up` `Log Channel : up` `Authentication Channel : up` `Last Error : None` `Alerts Sent : 14` `Logs Sent : 42` `[Alerts Detected]` `Signature : 0` `Alerts Suppressed : 0` `Scan : 0` `Denial of Service : 0` `Malware : 14` `[TIS Communication]` `Status : down` `IP : 0.0.0.0` `Port(Secure) : 8505` `FIPS Mode : Enabled` `Admin SSH/Console Access: Enabled` > [!NOTE] > Note > > If there is a failure in establishing trust relationship between the Sensor and Manager due to mismatch in shared secret key, the `Last Error` displays the message `Alert Channel - Install Keys Mismatch`. In such an instance, check the shared secret key on the Manager and set it on the Sensor using `set sensor sharedsecretkey` command.