--- title: "stty baud" slug: "stty-baud" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/stty-baud" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # stty baud Configures the terminal's baud rate setting. This command is executed only in standard mode and is not available during SSH sessions. ### Syntax `stty baud <baud_rate>` ### Parameters `baud_rate` Baud rate options are: 2400, 4800, 9600, 19200, 38400, 57600, and 115200. ### Example The following example sets the terminal baud rate to one of the allowed options. ``` hostname # stty baud 9600 ``` ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. - **Central Management System:** Before release 6.4 - **File Protect:** Before release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. - **Intelligent Virtual Execution - Server:** Before release 6.4