--- title: "Switching signer modes using the CLI" slug: "switching-signer-modes-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/switching-signer-modes-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Switching signer modes using the CLI Use the commands in this topic to switch signer modes. **To switch to the insecure signer mode:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Switch to the insecure signer mode. ``` hostname (config) # signer-whitelist mode insecure ``` 3. Verify that you have switched to the insecure mode. ``` hostname (config) # show signer-whitelist mode BA signer mode: insecure ``` 4. Save your changes. ``` hostname (config) # write memory ``` **To switch to the default signer mode:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Switch to the default signer mode. ``` hostname (config) # signer-whitelist mode default ``` 3. Verify that you have switched to the default mode. ``` hostname (config) # show signer-whitelist mode BA signer mode: default ``` 4. Save your changes. ``` hostname (config) # write memory ```