--- title: "Symantec Endpoint Protection configuration" slug: "symantec-endpoint-protection-configuration" tags: ["Reference", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:18Z published: 2026-09-02T19:14:18Z canonical: "docs.trellix.com/symantec-endpoint-protection-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Symantec Endpoint Protection configuration To configure System Endpoint Protection Logging to send logs to the Comm Broker Sender: 1. In the Symantec console, click **Admin**. 2. Click **Servers**. 3. Select the local or remote site for which you want to configure external logging. 4. Under **Tasks**, click **Configure External Logging**. 5. On the **General** tab, select how often you want log data to be sent. 6. Select the Master Logging server that you want to handle external logging. If you use Microsoft SQL with more than one management server connecting to the database, only one server needs to be a Master Logging Server. 7. Check **Enable Transmission of Logs to a Syslog Server**. 8. In the **Syslog Server** box, type the IP address or hostname of the Comm Broker Sender. The Destination Port information should be `UDP` and `514` (default). 9. Click **OK**. Default settings on the **Log Filter** tab are set to send all logs. If you run into performance issues, you can scale this back to send only relevant events.