--- title: "Synchronizing configuration settings using the Web UI" slug: "synchronizing-configuration-settings-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:32:10Z published: 2026-09-12T20:32:10Z canonical: "docs.trellix.com/synchronizing-configuration-settings-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Synchronizing configuration settings using the Web UI Use the **Appliances** > **Sensors** page to synchronize configuration settings from one appliance in an HA pair to the peer appliance. ![NXHA_PairMismatch_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3ab41e63-c777-898c-0797-12ee55bd277d.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A39%3A56Z&se=2026-11-20T08%3A39%3A56Z&sr=c&sp=r&sig=aM3z6WSUyOBnEi6ikYPnBeExQ8z3V%2BGE9T3Pymfkxj4%3D) ### Note All mismatched settings are synchronized with the source appliance at the same time. If necessary, you can manually adjust individual settings later. To synchronize the configuration: 1. Log in to the Central Management System Web UI. 2. Select **Appliances** > **Sensors**. 3. Click the pair name in the **Sensor** column to expand the HA pair. 4. In the **Action** column, click **Select** and then select one of the **Sync config with** links, depending on which settings you want to keep. For example, click **Sync nx-1 config with nx-2** if you want the nx-2 settings to be used for both appliances in the pair. :