--- title: "tacacs-server host <ip address> auth-type" slug: "tacacs-server-host-ip-address-auth-type" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/tacacs-server-host-ip-address-auth-type" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tacacs-server host <ip address> auth-type Sets the login authentication method used to establish communication between the FireEye appliance and the TACACS+ server. > [!NOTE] > Note > > This command overrides the global authentication type configured with the `tacacs-server auth-type` command. ### Syntax `tacacs-server host <ip address> auth-type <type>` ### Parameters `ip address` The IPv4 address of the TACACS+ server. `type` The login authentication method. Valid values are `ascii` and `pap` (Password Authentication Protocol). The default is `pap`. ### Example The following example sets ASCII as the login authentication method on the specified TACACS+ server. ``` hostname (config) # tacacs-server host 172.16.1.1 auth-type ascii ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4 - **Central Management System:** Before release 6.4 - **Email Security — Server:** Before release 6.4 - **File Protect:** Before release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4