--- title: "tacacs-server host <ip address> timeout" slug: "tacacs-server-host-ip-address-timeout" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/tacacs-server-host-ip-address-timeout" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tacacs-server host <ip address> timeout Specifies the number of seconds before retransmitting a request that previously timed out to this TACACS+ server. The default is 3. > [!NOTE] > Note > > This command overrides the global timeout value configured with the `tacacs-server timeout <seconds>` command. ### Syntax `tacacs server host <ip address> timeout <seconds>` ### Parameters `ip address` Specify the IPv4 address of this TACACS+ server. `seconds` Specify the number of seconds to wait before retransmitting a request that previously timed out. Valid values are 1–60. The default is 3. ### Example The following example configures a 10-second timeout for the specified TACACS+ server. ``` hostname (config) # tacacs-server host 172.16.1.1 timeout 10 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4 - **Central Management System:** Before release 6.4 - **Email Security — Server:** Before release 6.4 - **File Protect:** Before release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4