--- title: "tacacs-server key" slug: "tacacs-server-key" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/tacacs-server-key" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tacacs-server key Specifies a global value for the secret key used to communicate with the TACACS+ servers configured on an appliance. > [!WARNING] > Important > > The key you configure on the appliance must match the key that was configured on the TACACS+ servers. > [!NOTE] > Note > > For security, you can use this command without the `key string` parameter to be prompted to enter and confirm the key, with the entries masked with `*` characters. > > This key is not used to communicate with a specific TACACS+ server if another key is configured using the `tacacs-server host <ip address> key <key string>` command. ### Syntax `tacacs-server key [<key string>]` `no tacacs-server key` ### Parameters `no` Use the `no` form of this command to remove the global key from the appliance configuration. `key string` Specify the key string. ### Examples The following example sets the global secret key. ``` hostname (config) # tacacs-server key 789101 ``` The following example sets the global secret key with masked characters. ``` hostname (config) # tacacs-server key Key: ****** Confirm: ****** ``` The following example removes the global secret key. ``` hostname (config) # no tacacs-server key ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4 - **Central Management System:** Before release 6.4 - **Email Security — Server:** Before release 6.4 - **File Protect:** Before release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4