--- title: "tapsender VPC <hostname>" slug: "tapsender-vpc-hostname" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/tapsender-vpc-hostname" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tapsender VPC <hostname> Specifies the hostname of the TAP Virtual Private Cloud (VPC) within an Amazon Web Services (AWS) endpoint on the Trellix Network Security appliance. The appliance sends the network event logs to TAP in the AWS endpoint that you specified for further analysis. > [!NOTE] > Note > > TAP integration is not supported on the NX x3xx appliances and the NX 10000 appliance. ### Syntax `tapsender VPC <hostname>` ### Parameters `<hostname>` A valid hostname of the VPC within an AWS endpoint to which the appliance sends the network event logs to TAP. Port 443 is the default. ### Example The following example shows that the hostname of the VPC within an AWS hostname is `tapVPC.fireeye.com` to which the appliance sends the network event logs to TAP: ``` hostname (config) # tapsender VPC tapVPC.fireeye.com Enabling tapsender ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.9