--- title: "Task list for configuring and viewing data exfiltration alerts" slug: "task-list-for-configuring-and-viewing-data-exfiltration-alerts" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-10-01T12:26:28Z published: 2026-10-01T12:26:28Z canonical: "docs.trellix.com/task-list-for-configuring-and-viewing-data-exfiltration-alerts" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Task list for configuring and viewing data exfiltration alerts This task list summarizes the steps for configuring and viewing data exfiltration alerts on a appliance installed in a cloud or on-premises TrellixMVX deployment. ### Note If you use a SmartVision appliance for *data exfiltration detection only*, you can install the appliance either at the network *perimeter* or in the network *core*, depending on the locations of the hosts and networks being monitored. ### Prerequisites - Completion of [Task list for deploying SmartVision](/network-and-platform/docs/task-list-for-deploying-smartvision). To configure and enable data exfiltration detection: 1. Configure the homenet list with local hosts and networks to monitor for data theft. If the homenet list is empty, private IP address ranges—the network ranges defined in RFC 1918 for IPv4 networks or RFC 4193 for IPv6 networks—are used in place of a configured homenet list. The homenet list is empty by default. - [Adding hosts to the home network using the Web UI](/network-and-platform/docs/adding-hosts-to-the-home-network-using-the-web-ui) - [Adding hosts to the home network using the CLI](/network-and-platform/docs/adding-hosts-to-the-home-network-using-the-cli) 2. Enable data exfiltration detection. Data exfiltration detection is enabled by default. If data exfiltration detection has been disabled, you will need to enable it explicitly: - [Viewing the data exfiltration detection status using the Web UI](/network-and-platform/docs/viewing-the-data-exfiltration-detection-status-using-the-web-ui) - [Enabling data exfiltration detection using the Web UI](/network-and-platform/docs/enabling-data-exfiltration-detection-using-the-web-ui) - [Viewing data exfiltration detection status using the CLI](/network-and-platform/docs/viewing-data-exfiltration-detection-status-using-the-cli) - [Enabling data exfiltration detection using the CLI](/network-and-platform/docs/enabling-data-exfiltration-detection-using-the-cli) 3. Wait for egress traffic profiles to be built for the monitored hosts and networks. ### Important After you configure or edit the homenet list, it takes 72 hours to build baseline egress traffic profiles for the specified hosts and networks. 4. Filter the Alerts list for Data Exfiltration alerts only. - [Viewing data exfiltration alerts only using the Web UI](/network-and-platform/docs/viewing-data-exfiltration-alerts-only-using-the-web-ui) :