--- title: "Task list for managing ICAP integration" slug: "task-list-for-managing-icap-integration-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/task-list-for-managing-icap-integration-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Task list for managing ICAP integration Complete the steps for managing the ICAP integration in the following order: > [!NOTE] > Note > > ICAP for the evidence collector model of Network Security can only be managed using the CLI. 1. Make sure the third-party device settings are configured so that the device can act as an ICAP client. For details, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites-2). 2. (Optional) Enable feedback about the progress of ICAP downloads from the proxy server. See [Enabling feedback about ICAP traffic](/network-and-platform/docs/enabling-icap-feedback-with-the-return-patience-page-in-icap-client). 3. Enable the ICAP service on the Network Security appliance. For details, see [Enabling or disabling ICAP service using the Web UI](/network-and-platform/docs/enabling-or-disabling-icap-service-using-the-web-ui) or [Enabling or disabling ICAP service using the CLI](/network-and-platform/docs/enabling-or-disabling-icap-service-using-the-cli). 4. Enable the request modification mode and response modification mode. For details, see [Enabling or disabling ICAP request and response modification modes using the Web UI](/network-and-platform/docs/enabling-or-disabling-icap-request-response-modification-modes-web-ui) or [Enabling or disabling ICAP request and response modification modes Using the CLI](/network-and-platform/docs/enabling-or-disabling-icap-request-and-response-modification-modes-using-the-cli). 5. Configure the ICAP service settings so that the Network Security appliance can run an ICAP server. For details, see[Configuring the ICAP server port and SSL certificate using the Web UI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-using-the-web-ui) or [Configuring the ICAP server port and SSL certificate using the CLI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-using-the-cli). 6. (Optional) Enable ICAP blocking. A Network Security appliance operating as an ICAP server can block REQMOD and RESPMOD requests received from ICAP clients. For details, see [Enabling or disabling ICAP blocking mode using the Web UI](/network-and-platform/docs/enabling-or-disabling-icap-blocking-mode-using-the-web-ui) or [Enabling or disabling ICAP blocking mode using the CLI](/network-and-platform/docs/enabling-or-disabling-icap-blocking-mode-using-the-cli). When ICAP blocking is enabled, detection of a potential threat causes the appliance to block the requested data and instead serve the client browser a HTTP comfort page. For details, see [Enabling or Disabling the ICAP Blocking Comfort page using the CLI](/network-and-platform/docs/enabling-or-disabling-the-icap-blocking-comfort-page-using-the-cli). 7. Use the Hosts tab and Alerts tab in the Web UI to view the infected ICAP alerts based on traffic sent over ICAP. For details, see [Viewing ICAP alerts grouped by infected host in the Web UI](/network-and-platform/docs/viewing-icap-alerts-grouped-by-infected-host-in-the-web-ui) or [Viewing ICAP alert details grouped by alert in the Web UI](/network-and-platform/docs/viewing-icap-alert-details-grouped-by-alert-in-the-web-ui).