--- title: "Task list for viewing SmartVision alerts" slug: "task-list-for-viewing-smartvision-alerts" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/task-list-for-viewing-smartvision-alerts" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Task list for viewing SmartVision alerts This task list summarizes the steps for viewing SmartVision alerts. ### Tip Traffic that flows asymmetrically through a malware detection device can result in reduced detection. Network Security CLI commands can help you find the source of an asymmetric traffic flow. See “Finding the Source of Asymmetric Flows” in the *Network Security User Guide*. ### Prerequisites - Completion of [Task list for deploying SmartVision](/docs/task-list-for-deploying-smartvision). - Admin access to the SmartVision appliance. To view SmartVision alerts: 1. Log in to the SmartVision Web UI. 2. Check the dashboard What's Happening panel. On a SmartVision Edition appliance, this panel shows the number of Malware Guard alerts, Malware Object alerts, and alerts detected. On a SmartVision-enabled Network Security sensor or integrated appliance, additional alert categories are included. For details, see [What’s happening panel](/docs/what-s-happening-panel). 3. Check the dashboard Critical Malware Detection panel. The pie chart shows the number of hosts that triggered critical malware alerts: On a SmartVision Edition appliance, the panel shows the number of hosts that triggered Malware Object alerts. On a SmartVision-enabled Network Security sensor or integrated appliance, the panel shows the number of hosts that triggered Malware Object, Web Infection, and Malware Callback alerts. You can pivot from a pie chart section to the corresponding filtered alerts list. For details, see [Critical malware detection panel](/docs/critical-malware-detection-panel). 4. Go to the SmartVision alerts list. Select **Alerts > SmartVision**. For detailed information about this page, see [About the SmartVision alerts list](/docs/about-the-smartvision-alerts-list) and [Viewing the SmartVision alerts list](/docs/viewing-the-smartvision-alerts-list). 5. (If no alerts are seen on a SmartVision Classic edition appliance) **Measure the average EPS load**. - [Checking the average EPS using the CLI](/docs/checking-the-average-eps-using-the-cli) If the average EPS measured on your Classic edition appliance exceeds the recommended maximum EPS for that model, the appliance may fail to detect some post-exploitation attacker activities. Contact Trellix Technical Support. 6. Expand the entry for a alert you want to investigate. 7. Expand the entry for a SmartVision event you want to investigate. 8. View other events that involve the post-exploitation attacker. - [Viewing a SmartVision alert summary and downloading the context file](/docs/viewing-a-smartvision-alert-summary-and-downloading-the-context-file). - [Viewing network activity details for a SmartVision alert](/docs/viewing-network-activity-details-for-a-smartvision-alert). - [Viewing user activity details for a SmartVision alert](/docs/viewing-user-activity-details-for-a-smartvision-alert) - [Viewing base dvent details for a SmartVision alert](/docs/viewing-base-event-details-for-a-smartvision-alert) 9. (Optional) To reduce noisy SmartVision alerts, you can whitelist the alerts by traffic destination, traffic source, or rule. For a summary of the configuration steps, see [Task list for whitelisting noisy alerts](/docs/task-list-for-whitelisting-noisy-alerts). 10. (Recommended) Configure support for appliance system event notifications and distribution of scheduled SmartVision reports. For a summary of the configuration steps, see [Task list for configuring system event notifications and scheduled reports](/docs/task-list-for-configuring-system-event-notifications-and-scheduled-reports). 11. (Recommended) Configure the appliance to distribute SmartVision alerts. See [Configuring network event notifications](/docs/configuring-network-event-notifications). :