--- title: "tcpdump" slug: "tcpdump" updated: 2026-09-08T19:56:07Z published: 2026-09-08T19:56:07Z canonical: "docs.trellix.com/tcpdump" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tcpdump Capture tcpdump on any physical interface of Intelligent Sandbox. ##### **Syntax**: **`tcpdump <parameter>`** ### Important - Post tcpdump capture, the binary pcap files can be downloaded from Intelligent Sandbox web UI. File name: `atd_netdata.zip`. - The maximum pcap file size is limited to 10 MB. The maximum pcap file count is limited to 25 files. **Maximum file size**: Once, the maximum size is reached tcpdump automatically begins recording to a new file. **Maximum file count**: Once, the maximum count is reached, tcpdump automatically overwrites the first and subsequent log file until the user stops the capture. | Parameter | Description | | --- | --- | | start | Starts the packet capture operation on the specified tcp dump. You can set custom port option using the following syntax: **` tcpdump start <interface> <port options sepearted by underscore>`** ### Note **`<interface>`** is a required parameter. Interface value should be eth0, eth1, eth2, or eth3. **Example**: **`tcpdump start eth0 host_8.8.8.8`** To set multiple filters, use **`and`** and **`or`** operators separated by underscores. **Example**: **`tcpdump start eth0 host_8.8.8.8_and_port_53`** | | stop | Stops the packet capture operation. | | clean | Removes tcpdump results and .zip files. | | listfiles | Displays tcpdump output files. | | ls | Displays tcpdump output files. | | save | Saves .zip archive of tcpdump results to atdadmin account. | | status | Displays tcpdump progress status. | | view | Displays tcpdump results. | :