--- title: "Terminate Connection" slug: "terminate-connection-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:17Z published: 2026-11-19T12:29:17Z canonical: "docs.trellix.com/terminate-connection-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Terminate Connection A TCP reset is a network response that disconnects an established TCP transmission. The **Terminate Connection** option shuts down an attack from a malicious source, ends a transmission to a vulnerable destination, or drops both ends of a source-to-destination transmission. > [!NOTE] > Note > > Sending a TCP reset applies only to TCP protocol-based attacks. If a Sensor is in inline mode, it will drop all further packets instead of sending TCP resets. > [!NOTE] > Note > > **Terminate Connection** is not applicable for the Central Manager. **Steps:** 1. Navigate to **Analysis** → **** → **Attack Log**. 2. Select the TCP-based attack instance. 3. Click **Other Actions**, and select **Terminate Connection**. A confirmation window opens. **Terminate connection**![Terminate connection](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a8b54919-0d34-b7f4-e00a-633025a1546f(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A21Z&se=2026-11-20T12%3A16%3A21Z&sr=c&sp=r&sig=eYLqTJuQfV5fzqH9BHdl1mn0UG6bwxa%2FKrWv3Ez5f3Y%3D) 4. Select **Yes** to terminate the connection. The connection is terminated by sending a message to the device.