--- title: "Terminate signature set deployment in a Linux based Manager" slug: "terminate-signature-set-deployment-in-a-linux-based-manager" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:36Z published: 2026-10-05T15:40:36Z canonical: "docs.trellix.com/terminate-signature-set-deployment-in-a-linux-based-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Terminate signature set deployment in a Linux based Manager ## Task 1. Log in to the Manager shell. 2. Stop the Trellix IPS Manager service using the watchdog stop command. 3. Stop the Trellix IPS Manager Watchdog service using the manager stop command. 4. Execute dbShell command to log in to the database shell. 5. Execute the following command block: ``` use lf; ``` 6. Execute the following command block: ``` Select * from iv_sensor where name = ‘’; ``` | Field name | Description | | --- | --- | | <Sensor_Name> | Name of the Sensor you want to terminate the signature set deployment in the Manager. | 7. Execute the following command block: ``` UPDATE iv_sensor SET config_flags = 801 WHERE name = ‘'; ``` | Field name | Description | | --- | --- | | <Sensor_Name> | Name of the Sensor you want to terminate the signature set deployment in the Manager. | 8. Exit the database shell using the exit command. 9. Start the Trellix IPS Manager service using manager start command. 10. Start the Trellix IPS Manager Watchdog service using watchdog start command.