--- title: "The Rear View" slug: "the-rear-view-10" tags: ["Network Security (NX)", "Hardware"] updated: 2026-10-19T20:08:56Z published: 2026-10-19T20:08:56Z canonical: "docs.trellix.com/the-rear-view-10" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # The Rear View ![NX2600_RearView.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b38b46ff-c681-348b-72a6-a6b2d15b5c97(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A17Z&se=2026-11-20T10%3A12%3A17Z&sr=c&sp=r&sig=1cv6QR8%2F6kNRh05oNr4Vj6Ha6KkGPMZ32VDhwdC7CtM%3D) | 1) Power Supply 1 | 10) pether3 (RJ45) Monitoring 3 Port | | --- | --- | | 2) Power Supply 2 | 11) pether4 (RJ45) Monitoring 4 Port | | 3) Serial Console Ports | 12) pether5 (RJ45) Monitoring 5 Port | | 4) VGA Connector | 13) pether6 (RJ45) Monitoring 6 Port | | 5) USB 2.0 Port | 14) pether7 (SFP+) Monitoring 7 Port | | 6) USB 3.2 Port | 15) pether8 (SFP+) Monitoring 8 Port | | 7) IPMI Port | 16) pether9 (SFP+) Monitoring 9 Port | | 8) ether2/pether2 (RJ45) Management 2 Port | 17) pether10 (SFP+) Monitoring 10 Port | | 9) ether1 (RJ45) Management 1 Port | | #### Power - **Power:** Connect your power source to this port to provide power to the appliance. The appliance comes with one redundant power supply unit for use if the primary unit fails. #### I/O Ports - **USB**: The port is USB 2.0 compliant. - **Serial Console:** Connect to this port to manage the appliance from your terminal. - **Video:** Connect a monitor to this port to view the appliance's command-line interface. - **USB 2.0:** These ports are USB 2.0 compliant. - **USB 3.2:** These ports are USB 3.2 compliant. #### Management Ports - **ether1 (RJ45)**: Connect your LAN to this port to enable remote access to the CLI and Web UI. The RJ45 connector is a 10/100/1000BASE-T port. - **ether2/ pether2 (RJ45):** Connect your LAN to this port to enable remote access to the CLI and Web UI. The RJ45 connector is a 10/100/1000BASE-T port. - **IPMI:** Connect for access to out-of-band management functions, including power control, console redirection, and appliance health status. The connector is a 10/100/1000BASE-T port. #### Monitoring Ports Each interface pair is physically and logically segregated from other interface pairs, preventing communication between the different network segments. - **pether (SFP+):** The SFP+ connectors accept the following modules: - 1000BASE-SX/10GBASE-SR (LC MMF) - 1000BASE-LX/10GBASE-LR (LC SMF) - 1000BASE-T (RJ45) - 10GBASE-CU (5m direct attach cable) pether3 through pether6 support 1G data rate only and also supports hardware bypass. pether7 through pether10 support 1G/10G data rate. Connect the switch port you want to monitor to this monitoring port. Link partners connected to the same port pair must have the same data transmission rate (1 Gbps or 10 Gbps). The port pairs are as follows: - pether3 and pether4 - pether5 and pether6 - pether7 and pether8 - pether9 and pether10 Uncertified transceiver modules are not supported. For a list of supported transceiver modules, please contact your sales engineer. :