--- title: "The Rear View" slug: "the-rear-view-4" tags: ["Central Management System", "Hardware"] updated: 2026-09-03T19:48:35Z published: 2026-09-03T19:48:35Z canonical: "docs.trellix.com/the-rear-view-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # The Rear View ![CM4600_RearView.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-13158586-a5aa-2715-8425-5223d82e5aed(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A34%3A17Z&se=2026-11-20T10%3A34%3A17Z&sr=c&sp=r&sig=NAvlAFAn6ZfkwBXUEdEHSUHY%2FLQN2aayo6DCFDjwYXE%3D) | 1) Power Supply 1 | 7) IPMI Port | | --- | --- | | 2) Power Supply 2 | 8) ether2 (RJ45) HA link/HA backup link/Management Port | | 3) Serial Console Port | 9) ether1 (RJ45) Management 1 Port | | 4) VGA Connector | 10) ether3 (RJ45)HA link/HA backup link/Management Port | | 5) USB 2.0 Port | 11) ether4 (RJ45) HA link/HA backup link/Management Port | | 6) USB 3.2 Port | | #### Power - **Power:** Connect your power source to this port to provide power to the appliance. The appliance comes with one redundant power supply unit for use if the primary unit fails. #### I/O Ports - **USB 2.0**: These ports are USB 2.0 compliant. - **Serial Console:** Connect to this port to manage the appliance from your terminal. - **Video:** Connect a monitor to this port to view the appliance's command-line interface. - **USB 3.2:** These ports are USB 3.2 compliant. #### Management Ports - **ether1 (RJ45)**: Connect your LAN to this port to enable remote access to the CLI and Web UI. The RJ45 connector is a 10/100/1000BASE-T port. - **IPMI:** Connect for access to out-of-band management functions, including power control, console redirection, and appliance health status. The connector is a 10/100/1000BASE-T port. ### Important The IPMI interface port is only enabled in CM Release 8.2.0 or later and IPMI firmware version 2.07 or earlier. #### HA link/HA backup link/Management Ports - **ether2 through ether4 (RJ45):** The RJ45 connectors are 10/100/1000BASE-T ports. :