--- title: "Time management" slug: "time-management-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/time-management-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Time management You can set the appliance date and time manually and then use one or more Network Time Protocol (NTP) servers that synchronize the time automatically. You can also specify a secondary NTP server if the primary NTP server is unavailable. ### Configuring the NTP Server To configure the NTP server: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter the network settings: `hostname # network` 6. To set NTP servers, type `3`. When prompted, enter the space-separated list of NTP server addresses and press `Enter`. 7. Type `q` to save your settings and exit. 8. Type `y` or `n` to confirm your changes. 9. Type `Y` to restart the network