--- title: "Time zone configuration" slug: "time-zone-configuration-5" tags: ["Network Security (NX)"] updated: 2026-08-24T22:01:11Z published: 2026-08-24T22:01:11Z canonical: "docs.trellix.com/time-zone-configuration-5" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Time zone configuration You must set the time zone on your Network Security appliance whether you configure the date and time manually or synchronize with an NTP server. - [Setting the date and time using the Web UI](/network-and-platform/docs/manual-time-configuration-2) - [Setting the date and time using the CLI](/network-and-platform/docs/manual-time-configuration-2) ##### Setting the time zone using the Web UI Use the bottom section of the **Date and Time Settings** page to set the time zone for your Network Security appliance. > [!NOTE] > Note > > The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI. ![All_Settings_DateTimeZoneUTC_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bc6f022b-a0d4-ebfa-8f85-030da4937a0a(4).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A03%3A40Z&se=2026-11-20T08%3A03%3A40Z&sr=c&sp=r&sig=L00dM8FzQYIWN1x9XH7uaKwgrg0eTaZey0PswDku630%3D)![All_Settings_DateTimeZone_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fcfc8867-0089-c303-7a91-77b9d4ecaf03(4).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A03%3A40Z&se=2026-11-20T08%3A03%3A40Z&sr=c&sp=r&sig=L00dM8FzQYIWN1x9XH7uaKwgrg0eTaZey0PswDku630%3D)Prerequisites - Admin access To set the time zone: 1. Click the **Settings** tab. 2. Click **Date and Time** on the sidebar. 3. Select the time zone from the drop-down list. 4. Select options from other drop-down lists, if present. 5. Click **Set Time Zone**. ##### Setting the time zone using the CLI Use the CLI commands in this topic to set the time zone on your Network Security appliance. Prerequisites - Admin access To set the time zone: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To specify the time zone, use the `clock timezone <timezone>` command. For example, both of the following commands set the time zone to Pacific Standard Time: ``` hostname (config) # clock timezone UTC-offset UT ``` ``` hostname (config) # clock timezone America North United_States Pacific ``` > [!NOTE] > Note > > The time zone is for display purposes and should match other security device settings. 3. Restore the default time zone: ``` hostname (config) # no clock timezone ``` 4. View the configured time and date settings: ``` hostname (config) # show clock ``` 5. Save your changes: ``` hostname (config) # write memory ``` ###### Examples Time and Date Using the North America Central Daylight Timezone ``` hostname # show clock Time:        16:39:35 Date:        2014/06/25 Time zone:   America North United_States Central             (US/Central) UFC offset: -0500 (UTC minus 5 hours) ``` Time and Date Settings Using the Default Timezone ``` hostname # show clock Time:         21:40:37 Date:         2014/06/25 Time zone:    UTC              (Etc/UTC) UTC offset:   same as UTC ```