--- title: "To check if connection between ePO server and NTBA Appliance is established" slug: "to-check-if-connection-between-epo-server-and-ntba-appliance-is-established-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/to-check-if-connection-between-epo-server-and-ntba-appliance-is-established-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # To check if connection between ePO server and NTBA Appliance is established Run the `show endpointintelligence summary` command: Check the ePO connection status and the ePO certificate status as shown. The output of the command is: `[Endpoint Configuration and Status]` `Endpoint Intelligence Service : Not Running` `ePO Server IP : 0.0.0.0` `Last ePO connection attempt : 2013-10-01 09:12:20` **`Last ePO connection status : Failed (ePO server not reachable)`** **`ePO certificate : Not available`** `Alert throttling : Disabled` `GTI file reputation server : Reachable` `[Endpoint connections]` `Total active endpoint connections : 22` `Total packets received : 16884` `Total packets sent : 778` `Last packet received time : 2013-10-01 07:49:05` `Last packet sent time : 2013-10-01 08:06:23` `Last endpoint connected : 172.16.232.109` If there is a failure in downloading the ePO certificate, the reason is displayed for troubleshooting purpose.