--- title: "To configure a RADIUS user" slug: "to-configure-a-radius-user" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/to-configure-a-radius-user" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # To configure a RADIUS user Perform the following steps to configure a RADIUS user. **Steps:** 1. Login to the web interface. 2. Go to **User** → **RADIUS**. 3. Click **Enable**. > [!NOTE] > Note > > When RADIUS is enabled, TACACS+ cannot be enabled at the same time. > [!NOTE] > Note > > By default, the **Local Login** is enabled. But, if the **Local Login** is unchecked, the local login users (including the default Trellix user) will not have access to the Active Fail-Open chassis. ![GUID-86CA856B-106B-4746-8C57-D1B7E1037EF5-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5a718b4b-d0ce-a6d6-b369-3f9fcd062f51.jpg?sv=2026-02-06&spr=https&st=2026-11-20T20%3A19%3A42Z&se=2026-11-20T21%3A19%3A42Z&sr=c&sp=r&sig=34De75YIpuwnaiJfIbc8EXUI4ZCM7agj%2F4yfP1VacvQ%3D) 4. Under **User Privilege**, select **Readonly/Normal/Admin** from the drop-down list. 5. Under **Server**, enter a RADIUS server ID (For example, Server ID: 1). 6. Click **Add**. A new server ID row is added. 7. Enter the **Host** (Radius server IP), **Secret** (Password), and the **Timeout(sec)**. > [!NOTE] > Note > > - The password should have a minimum of 8 characters and a maximum of 128 characters. > - The RADIUS server IP cannot be repeated. Only when the authentication port is different, the server IP can be repeated. By default, the authentication port is 1812. ![GUID-B9E875E5-41A3-4BF3-A984-4E484EC81CEC-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-aeef649d-c8d1-2dbb-4f8f-2647c3a3bdf7.jpg?sv=2026-02-06&spr=https&st=2026-11-20T20%3A19%3A42Z&se=2026-11-20T21%3A19%3A42Z&sr=c&sp=r&sig=34De75YIpuwnaiJfIbc8EXUI4ZCM7agj%2F4yfP1VacvQ%3D) 8. Click **Commit**. 9. To save your configuration, select the **Save** tab. Click **Save**. ![GUID-96F4E74A-5212-4AD5-A77D-CFC5CCB07B45-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b2db946f-d01c-3377-302e-4be95c6dae3f.jpg?sv=2026-02-06&spr=https&st=2026-11-20T20%3A19%3A42Z&se=2026-11-20T21%3A19%3A42Z&sr=c&sp=r&sig=34De75YIpuwnaiJfIbc8EXUI4ZCM7agj%2F4yfP1VacvQ%3D) **Result:** RADIUS user is configured successfully.