--- title: "To enable MVX sensor mode:" slug: "to-enable-mvx-sensor-mode-1" tags: ["IVX Cloud", "Sec Ops and Analytics", "Product Usage"] updated: 2026-09-04T14:05:43Z published: 2026-09-04T14:05:43Z canonical: "docs.trellix.com/to-enable-mvx-sensor-mode-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # To enable MVX sensor mode: 1. Log in to the integrated appliance CLI. 2. Go to CLI configuration mode: hostname > **enable** hostname # **configure terminal** 3. Enable sensor mode: hostname (config) # **mvx mode sensor** 4. Reload the appliance: hostname (config) # **reload** 5. Press Enter when prompted to save changes. **Example** The following example enables nx-3 to function as a sensor. ``` nx-3 (config) # mvx mode sensor MVX sensor mode configuration successful. Please reload the appliance to come up in the configured mode nx-3 (config) # reload Configuration has been modified; save first? [yes] nx-3 # show mvx status MVX Mode Status:    Sensor Config Enabled:     yes    Mode Reboot Required:      no    Current Operating Mode:    sensor ``` :