--- title: "To re-enroll a sensor:" slug: "to-re-enroll-a-sensor" tags: ["Product Usage", "IVX Cloud", "Sec Ops and Analytics"] updated: 2026-09-04T14:05:43Z published: 2026-09-04T14:05:43Z canonical: "docs.trellix.com/to-re-enroll-a-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # To re-enroll a sensor: 1. Log in to the sensor CLI. 2. Enable the CLI configuration mode: `appl-hostname > enable` `appl-hostname # configure terminal` 3. Re-enroll the sensor: `appl-hostname (config) # mvx cluster enroll now` 4. Verify your change: `appl-hostname (config) # show mvx cluster enrollment status` 5. Save your change: `appl-hostname (config) # write memory` **Examples** The following example unsubscribes the nx-6 sensor. ``` nx-6 (config) # mvx cluster unenroll now Operation initiated in the background.    Run 'show mvx cluster enrollment status' nx-6 (config) # show mvx cluster enrollment status MVX Cluster Enrollment Status Enrollment Client:    Status ok:                      no    Status description:             unenrolled    Last checked at:                2019/08/21 00:39:03 Enrollment Service:    Auto enabled:                   yes    Service address:                DTI (DTIUser@mvx-broker.fireeyecloud.com)    Preferred cluster:              any (less loaded)    Cloud enabled:                  yes    Cloud License enabled:          yes After you reload the sensor, the status is as follows: nx-6 (config) # show mvx cluster enrollment status Enrollment Client:    Status ok:                      no    Status description:             Enrollment Service    Unavailable Last checked at:    2019/08/21 00:48:30 Enrollment Service:    Auto enabled:                   yes    Service address:                DTI (DTIUser@mvx-broker.fireeyecloud.com)    Preferred cluster:              any (less loaded) The following example sends a request to enroll the nx-05 sensor. nx-05 (config) # mvx cluster enroll now Operation initiated in the background.    Run 'show mvx cluster enrollment status' nx-05 (config) # show mvx cluster enrollment status MVX Cluster Enrollment Status Enrollment Client:    Status ok:                      yes    Status description:             yes    Last checked at:                2019/08/18 20:55:41 ... ``` :