--- title: "To restore automatic enrollment:" slug: "to-restore-automatic-enrollment" tags: ["Product Usage", "IVX Cloud", "Sec Ops and Analytics"] updated: 2026-09-04T14:05:43Z published: 2026-09-04T14:05:43Z canonical: "docs.trellix.com/to-restore-automatic-enrollment" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # To restore automatic enrollment: 1. Log in to the sensor CLI. 2. Enable the CLI configuration mode: `appl-hostname > enable` `appl-hostname # configure terminal` 3. Restore automatic enrollment: `appl-hostname (config) # mvx cluster enrollment-service client enable` 4. Verify your change: `appl-hostname (config) # show mvx cluster enrollment status` 5. Save your change: `appl-hostname (config) # write memory` **Example** The following example restores automatic enrollment on the nx-1 sensor. ``` nx-1 (config) # mvx cluster enrollment-service client enable nx-1 (config) # show mvx cluster enrollment status MVX Cluster Enrollment Status Enrollment Client:    Status ok:                yes    Status description:       enrolled    Last checked at:          2019/07/11 22:51:01 Enrollment Service:    Auto enabled:             yes    Service address:          DTI (DTIUser@cloud.fireeye.com)    Preferred cluster:        any (less loaded)    Cloud enabled:            yes    Cloud License enabled:    yes    Connect on demand:        yes Broker Info:    Cluster Name:             Cloud-MVX    Broker Name:              Cloud-MVX-Broker    Broker ID:                N/A    Broker Address:           mvx.fireeyecloud.com    Broker State:             Connected    Failure Reason:           None    Last Connection Attempt:  2019/07/07 22:13:58    Connection Last Formed:   2019/07/07 22:13:59    Connection Last Broken: ``` :