--- title: "tpm enable" slug: "tpm-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/tpm-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # tpm enable To enable the trusted platform module (TPM) through physical presence, use the `tpm enable` command in configuration mode. > [!WARNING] > Important > > You enable the TPM only once. You cannot undo this procedure. > [!WARNING] > Caution > > If you enable the TPM but do not have a keyboard directly attached to your appliance, you might lose access to the system after it restarts. > [!NOTE] > Note > > If a serial console or IPMI console is attached to the appliance, the appliance will not enable the TPM. ### Syntax `[no] tpm enable` ### Parameters `no` Cancels the TPM physical presence request. ### Example The following example enables the TPM through physical presence: ``` hostname (config) # tpm enable ``` ### User role Admin ### Supported appliances Command introduced in Release 7.6.0.