--- title: "traceroute" slug: "traceroute-2" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/traceroute-2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # traceroute Sends three probe packets to trace the routers in the path to a specified destination. For each router in the path, the hostname and IP address are shown, along with the roundtrip times measured for each probe. ### Syntax `traceroute [-46dFITnreAUDV] [-f first_ttl] [-g <gate>,...] [-i <device>] [-m max_ttl] [ -N <squeries>] [-p <port>] [-t <tos>] [-l <flow_label>] [-w <waittime>] [-q nqueries>] [-s <src_addr><] [-z <sendwait>] [--fwmark=num] host [<packetlen>]` ### Parameters `-4` Use IPv4. `-6` Use IPv6. `-d --debug` Enable socket level debugging. `-F --dont-fragment` Do not fragment packets. `-f first_ttl --first=first_ttl` Start from the first_ttl hop (instead from 1). `-g gate,... --gateway=gate,...` Route packets through the specified gateway (maximum 8 for IPv4 and 127 for IPv6). `-I --icmp` Use ICMP ECHO for tracerouting. `-T --tcp` Use TCP SYN for tracerouting (default port is 80). `-i device --interface=device` Specify a network interface to operate with. `-m max_ttl --max-hops=max_ttl` Set the max number of hops (max TTL to be reached). Default is 30. `-N squeries --sim-queries=squeries` Set the number of probes to be tried simultaneously (default is 16). `-n` Do not resolve IP addresses to their domain names. `-p port --port=port` Set the destination port to use. It is either the initial udp port value for "default" method (incremented by each probe, default is 33434), or initial seq for "icmp" (incremented as well, default from 1), or some constant destination port for other methods (with default of 80 for "tcp", 53 for "udp", and so on). `-t tos --tos=tos` Set the TOS (IPv4 type of service) or TC (IPv6 traffic class) value for outgoing packets. `-l flow_label --flowlabel=flow_label` Use the specified flow label for IPv6 packets. `-w waittime --wait=waittime` Set the number of seconds to wait for response to a probe (default is 5.0). Non-integer (floating point) values are allowed. `-q nqueries --queries=nqueries` Set the number of probes per each hop. Default is 3. `-r` Bypass the normal routing and send directly to a host on an attached network. `-s src_addr --source=src_addr` Use the source address for outgoing packets. `-z sendwait --sendwait=sendwait` Minimum time interval between probes (default 0). If the value is more than 10, then it specifies a number in milliseconds, else it is the number of seconds (floating point values are allowed). `-e --extensions` Show ICMP extensions (if present), including MPLS. `-A --as-path-lookup` Perform AS path lookups in routing registries and print results directly after the corresponding addresses. `-M name --module=name` Use the specified module (either builtin or external) for traceroute operations. Most methods have their shortcuts (for example, ``-I`' means ``-M icmp`'). `-O OPTS,... --options=OPTS,...` Use module-specific option OPTS for the traceroute module. Several OPTS are allowed, separated by commas. If OPTS is "`help`", print information about available options. `--sport=num` Use source port *num* for outgoing packets. Implies ``-N 1`'. `--fwmark=num` Set firewall mark for outgoing packets. `-U --udp` Use UDP to a particular port for tracerouting (instead of increasing the port per each probe). The default port is 53. `-UL` Use UDPLITE for tracerouting. The default dest port is 53. `-D --dccp` Use DCCP Request for tracerouting. The default port is 33434. `-P prot --protocol=prot` Use raw packet of protocol *prot* for tracerouting. `--mtu` Discover MTU along the path being traced. Implies ``-F -N 1`'. `--back` Guess the number of hops in the backward path and print if it differs. `-V --version` Print version information and exit. `--help` Print this help and exit. Arguments: `+ host` The host to traceroute to. `packetlen` The full packet length (default is the length of an IP header plus 40). Can be ignored or increased to a minimal allowed value ### Example The following example traces the path to the specified address, and omits hostname lookups for the output. ``` hostname > traceroute -n 192.168.0.127 traceroute to 192.168.0.127 (192.168.0.127), 30 hops max, 40 byte packets 1 192.168.53.130 2 ms 0 ms 0 ms 2 192.168.53.70 2 ms 2 ms 4 ms 3 192.168.53.1 0 ms 2 ms 2 ms 4 192.168.52.15 2 ms 2 ms 2 ms 5 192.168.0.127 2 ms 2 ms 2 ms ``` ### Supported appliances - **Central Management System:** Before Release 7.6 - **Malware Analysis:** Before Release 7.6 - **Email Security — Server:** Before Release 7.6 - **File Protect:** Before Release 7.6 - **Network Security:** Before Release 7.6 - **Endpoint Security (HX):** Release 2.5