--- title: "traceupload" slug: "traceupload-1" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/traceupload-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # traceupload This command uploads an encoded diagnostic trace file to the configured TFTP server, from which you can send it to the Trellix Technical Support for diagnosing a problem with the Sensor. A trace upload facility is also available in the Manager interface. **Syntax:** traceupload WORD where WORD stands for the file name to which the trace must be written. Note the following: - Before executing this command, configure TFTP server on NTBA Appliance by running the set tftpserver ip command. - When loading a trace file from the configured TFTP server, the pathname of the file should be relative to /tftpboot. - Before executing this command (uploading on the TFTP server), ensure that the file is created on the TFTP server with write permissions for all. > [!NOTE] > Note > > As part of traceupload command, additional information is collected using logstat. Due to this, additional time is required to collect logs from the Sensor, and can take around 10-30 minutes based on the Sensor model. On executing the command, the following messages are displayed: Please enter Y to confirm: y Uploading trace file to TFTP server Trace file uploaded successfully to TFTP server. **Applicable to:** NS-series Sensors