--- title: "Trellix IPS fail-over architecture" slug: "trellix-ips-fail-over-architecture-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:35Z published: 2026-11-19T12:28:35Z canonical: "docs.trellix.com/trellix-ips-fail-over-architecture-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Trellix IPS fail-over architecture Trellix IPS was built with high availability in mind. In fact, those who initially become confused by the possibilities around Trellix IPS fail-over usually do so because the implementation is actually simpler than they assume initially. Note the following points regarding Trellix IPS fail-over architecture: - Sensors are invisible at layer 2 and above; the monitoring ports do not even have MAC addresses. - Sensors configured for failover confirm a "heartbeat" once each second. - Sensors configured for fail-over share flow information in real time. As a result, you do not have to worry about Layer 2 and 3 topology changes when you introduce Trellix IPS fail-over into the environment; and in the unlikely event of a Sensor failure, fail-over is instantaneous and connection state is maintained.