The new docs.trellix.com features a modernized UI and AI-powered conversational search. Content is currently available in English, with additional languages expected in November 2026. We hope you enjoy the updated experience.

Trellix IPS Manager NS-Series 11.1 Update 12 Release Notes

Prev Next

Release summary

This release introduces new inspection capabilities, expands infrastructure support, and enhances administrative features in Trellix Intrusion Prevention System (IPS).

  • Integrates the Suricata 8.x engine and expands hardware support to NS9600, NS7600, and NS3600 Series appliances.

  • Supports mutual Transport Layer Security (mTLS) in Secure Sockets Layer (SSL) decryption to provide mutual authentication.

  • Extends IPv6 support across infrastructure, threat intelligence services, and packet capture filtering.

  • Introduces hyperautomation capabilities to allow network detection and response (NDR) actions to trigger Trellix IPS Manager REST APIs.

  • Adds an API rate limiting service to prevent system overloads during automated responses.

  • Consolidates licensing by merging Proxy SSL inspection capabilities into standard base licenses.

  • Enhances Manager Disaster Recovery (MDR) synchronization by automatically backing up and synchronizing feature configuration files.

  • Adds Microsoft Hyper-V support for Linux-based Manager deployments on Windows Server 2022 environments.

  • Extends supports for 3-node, 4-node, and 5-node stacking configurations on NS9600 appliances to scale inspection throughput up to 300 Gbps.

Release rating

This release may include minor enhancements, performance optimizations, cosmetic UI fixes, or minor bug resolutions that do not affect core security or system stability.

Customer action: Optional. Install this release at your convenience.

What’s new

  • Suricata 8.x integration and multi-sensor support

    • Expanded hardware support — The Suricata IPS engine is now supported on NS9600, NS7600, and NS3600 Series appliances running Sensor versions 11.1M12 or later.

    • Engine upgrade — The integrated Suricata engine is upgraded from version 3.x to 8.x for NS9500 and NS7500 Series appliances running Sensor versions 11.1M12 or later. This upgrade includes updated libhtp, libyaml, and libpcre dependencies. Appliances running versions earlier than 11.1M12 continue to run version 3.x.

    • Automatic multi-version rule validation — To support mixed Sensor fleets, the Manager (Windows and Linux) bundles both 3.x and 8.x rule validator binaries. The Manager automatically detects the target sensor version and applies the correct validator without requiring manual configuration:

      • Applies the 8.x validator to sensors running 11.1M12 or later.

      • Applies the 3.x validator to sensors running versions earlier than 11.1M12.

  • Support mutual TLS in inbound and outbound SSL decryption UI/workflow changes:

    Starting with the 11.1M12 release, Trellix IPS supports mutual Transport Layer Security (mTLS) in Secure Sockets Layer (SSL) decryption. Mutual TLS provides mutual authentication, where the protected server and the client validate each other using certificates. You can configure proxy rules for inbound and outbound SSL traffic to inspect encrypted sessions.

    This release provides the following capabilities:

    • Certificate management: Import known-key certificates for servers and clients, and import multiple resigning certificates.  

    • Inbound proxy rules: Configure rules for inbound SSL traffic to protect internal servers. Inbound rules require a known-key certificate for server authentication. For client authentication, you can configure a known-key certificate or a resigning certificate.  

    • Outbound proxy rules: Configure rules for outbound SSL traffic to inspect external connections. Outbound rules require a resigning certificate for server authentication. For client authentication, you can configure a known-key certificate or a resigning certificate.

    • Dual authentication support: Configure both server authentication and client authentication within a single inbound or outbound proxy rule.

    For configuration procedures and interface paths, see section Inspection of SSL/TLS traffic in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Enhanced user authentication support in Trellix IPS Manager APIs

    Starting with release 11.1, Trellix IPS Manager APIs support passing authentication type and RADIUS ID parameters during user provisioning. This enhancement enables administrators to create and import multiple users programmatically.
    For more information, see Get All User Details in Trellix Intrusion-Prevention-System-11.1.x-Manager-Api-Reference-Guide.

  • Enhanced web server simultaneous connection limits in Trellix IPS

    Starting with release 11.1, administrators can configure higher thresholds for maximum simultaneous web server connections in the Inspection Policy. Previously, the system enforced a hardcoded limit of 750,000 simultaneous connections. Traffic exceeding this threshold was dropped, even when the connections were legitimate cold traffic and not a denial-of-service (DoS) attack.

  • Automate NDR response actions using Hyperautomation

    This release introduces hyperautomation capabilities that allow Network Detection and Response (NDR) actions to trigger IPS Manager REST APIs. This enhancement is designed to bridge the operational gap between threat detection and response, moving beyond traditional static, signature-based rules to address sophisticated threats.

  • API Rate Limiting Service

    This release introduces a backend rate limiting service for the IPS Manager server. This service prevents system overloads from excessive client requests during automated NDR response actions. The RateLimit-SDK is a Java library that protects RESTful APIs using multi-stage rate limiting.

    For more information, see API rate limiting service in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Extending IPv6 support in Trellix IPS

    With this release of 11.1, IPv6 support has been further extended across Trellix IPS infrastructure and threat intelligence services. This enhancement enables significant management, threat detection, analysis, and administrative capabilities within IPv6 network environments.

    • You can now combine hostnames and IPv6 addresses in a single rule for Source Address, Destination Address, or both fields simultaneously.

    • The Manager now supports forwarding system logs to Syslog servers configured with IPv6 addresses. This support applies to Quarantine, IPS Event, and Firewall Access logging.

    • The Manager now supports standardized IPv6 address displays. This update ensures compliance with the RFC 5952 standard for all IPv6 addresses.

  • Enhanced IPv6 packet capture support in Trellix IPS

    With this release, Trellix IPS supports packet capture filtering for IPv6 traffic. This enhancement allows administrators to filter, capture, and export IPv6 network traffic using Trellix IPS Manager or the Sensor command-line interface (CLI).

    Trellix IPS provides the following IPv6 packet capture capabilities:

    • Define packet capture filters using IPv6 source addresses, destination addresses, and protocols such as ICMP.

    • Configure IPv6 packet capture rules across individual monitoring ports or all Sensor ports.

    • Combine IPv4 and IPv6 packet capture rules within a single capture profile.

    • Store IPv6 filter profiles in dedicated Sensor memory tables to match ingress network traffic.

    • Upload captured IPv6 PCAP files directly to Trellix IPS Manager for analysis.

      For more information, see Configure and manage packet capture rules in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Consolidated unified licensing for Trellix Intrusion Prevention System

    Starting with this release, Trellix IPS introduces a consolidated unified licensing model. This enhancement merges Proxy Secure Sockets Layer (SSL) inspection capabilities directly into the standard base licenses for NS-Series hardware appliances. A user-controlled interface toggle manages the software activation of SSL inspection.

    For more information, see Add a System license to the Manager in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Enhanced feature configuration file synchronization in MDR

    Starting with this release of 11.1, the Manager enhances Manager Disaster Recovery (MDR) synchronization.

    The Manager automatically backs up and synchronizes feature configuration files stored on the file system alongside database tables to the secondary Manager. This enhancement synchronizes certificates for Trellix Logon Collector (TLC), Syslog over Secure Sockets Layer (SSL), and Lightweight Directory Access Protocol (LDAP) authentication. This synchronization maintains continuous connectivity during failover and eliminates manual certificate re-importing.

    For more information, see Preparations for Manager Disaster Recovery (MDR) in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Enhanced temporary file pruning

    Starting with this release of 11.1, the Manager provides an option to prune temporary files. You can schedule automatic deletion of temporary deployment and troubleshooting files.

    For more information, see Set up a schedule for file pruning in Trellix Intrusion Prevention System 11.1.x Product Guide.

  • Microsoft Hyper-V support for Linux-based Manager

    You can now deploy Linux-based Manager/Central Manager on Microsoft Hyper-V. This release supports virtual machine deployment on Windows Server 2022 environments.

    The Manager running on Trellix OS provides a flexible deployment option for organizations using Microsoft Hyper-V.

    For more information, see Create a Manager instance using a vhdx file in Trellix Intrusion Prevention System 11.1.x Installation Guide.

  • Simplified Performance Monitoring setup

    Starting with this release of 11.1, the Sensor Performance Monitoring controls are unified into a single Performance Monitoring node containing a Summary tab, a Configuration tab, and a Threshold tab so you can see status, make configuration changes, and update thresholds from one place rather than having to switch between nodes.

  • Multi-node stacking support for NS9600 Sensors

    Starting with this release of 11.1, Trellix IPS extends stacking capabilities on NS9600 Sensors to include 3-node, 4-node, and 5-node configurations. Previously, Trellix IPS supported stacking for up to two appliances. This enhancement enables multiple physical appliances to operate as a single logical inspection device managed through the Manager.

    For more information, see Stacking NS9600 Sensors and Considerations for NS9600 Sensor stack in Trellix IPS NS9600 Sensor Hardware Guide.

    Important

    For the 11.1M12 release, High Availability (HA) configuration is not supported for NS9600 5-node stack.

  • IPS CLI enhancements

    The following Sensor CLI commands are included:

    Debug Mode

    Command

    Description

    show ssl proxy stats decrypt all

    This command displays cumulative statistics for all Secure Sockets Layer (SSL) proxy decryption instances on the Sensor

    Trellix OS Manager shell commands

    Command

    Description

    ipsmanager ratelimit enable

    This command is used to enable the rate limit feature on the Manager.

    ipsmanager ratelimit disable

    This command is used to disable the rate limit feature on the Manager.

    ipsmanager database harden on

    This command is used to to harden the MariaDB security.

    ipsmanager database harden off

    This command is used to revert the MariaDB hardening configurations.

    ipsmanager database harden on-allow-remote

    This command is used to harden the MariaDB security but configures specific exceptions to still allow remote database communication.

Resolved issues

General

Issue ID

Description

NSPMGR-30746

High Availability (HA) Sensor pairs are missing from the device selection drop-down list on the quarantine configuration page.

NSPMGR-30597

The Manager displays outdated endpoint hostnames for dynamic IP addresses instead of retrieving the most recent active owner from ePolicy Orchestrator (ePO).

NSPMGR-30738

Attempting to re-enable an existing Intelligent Sandbox configuration when the sandbox device is offline causes the page to load indefinitely.

NSPMGR-30699

The Anti-Spoofing configuration page fails to retrieve or display details for High Availability (HA) Sensors configured with Classless Inter-Domain Routing (CIDR) sub-interfaces.

NSPMGR-30670

In MDR environments, the secondary Manager generates a missing syslog server fault during Access Control List (ACL) cache updates.

NSPMGR-30658

Saving malware policy updates fails with an error stating the Intelligent Sandbox is disconnected, even when sandbox scanning is disabled on the Sensor interface.

NSPMGR-30643

The Manager now supports an increased maximum limit of Inbound Proxy Rules to allow larger rule mappings.

NSPMGR-30642

Custom logon banner images fail to render on the Manager login page, displaying only the accompanying text description.

NSPMGR-30567

The Manager displays an outdated last check-in time for integrated ePolicy Orchestrator (ePO) endpoints.

NSPMGR-30551

Users with the NOC Operator role are logged out of the Web UI when selecting the Description tab of an alert in the Attack Log.

NSPMGR-30462

Forwarded syslog notifications format the attack confidence or Behavioral Threat Prediction (BTP) as N/A instead of forwarding the actual severity value.

NSPMGR-30418

Syslog alert notifications forward source and target hostnames as N/A even when valid hostnames exist in the alert details.

NSPMGR-30393

License import validation now catches capacity float-parsing errors and raises a format exception rather than a duplicate ID error.

NSPMGR-30308

Quarantine alert end times on member ports of a Port Cluster use default values instead of inheriting custom configurations from the Master Port.

NSPMGR-29964

The Manager now includes local and cloudbased-IVX connection status fault alerts to notify administrators when analysis services are unreachable.

NSPMGR-29818

Updated controller monitoring logic prevents local virtual Sensor controllers in Microsoft Azure from intermittently reporting as offline in the Manager.

NSPMGR-29410

The Active Directory Server test connection fails when SSL authentication is enabled, even after successfully importing the certificate.

NSPMGR-28277

Port throughput threshold configuration sections disappear from the UI page when saved after unassigning monitoring ports.

NSPMGR-30237

Background NullPointerExceptions are logged during device profile database updates when filling CPE strings for dynamic host profiles.

NSPMGR-30049

Email server notifications fail to send after a Manager restart until credentials are saved again in the Web UI.

NSPSNSR-17528

Removes the unsupported option to select the Suricata engine in advanced settings for hardware models that only support the native rule engine.

NSPSNSR-16488

A status flag seals the session transcript buffer immediately after the ClientKeyExchange packet, ensuring correct session hash calculation and inbound SSL decryption.

NSPSNSR-17463

Transceiver certification mismatch faults are continuously logged on High Availability ports configured on hardware Sensor models.

NSPSNSR-17406

Active quarantine timestamps on the Sensor are cleared and cannot be recovered after a Manager service restart.

NSPSNSR-17263

String boundary handling in the HTTP parser is fixed to extract and preserve hostnames containing trailing periods.

NSPSNSR-17186

Packet engine interface evaluation logic is updated to bypass disabled ports, preventing alert events from being incorrectly logged for disabled interfaces.

NSPSNSR-17029

Quarantine state handshakes and timer reporting are synchronized between the Sensor detection engine and Manager to resolve timing discrepancies across clustered interfaces.

NSPSNSR-16815

X-Forwarded-For (XFF) inspection logic is updated to identify and map proxy and origin client and server IP addresses in signature alerts.

NSPSNSR-17385

Automated timeout recovery and process termination logic are added to prevent malware engine update processes from hanging indefinitely.

NSPSNSR-17380

A Layer-7 analysis engine crash occurs during protocol qualifier lookups on hardware Sensors.

NSPSNSR-17316

Air-gapped Sensors fail to receive and apply private cloud threat intelligence URL reputation configurations from the Manager.

NSPSNSR-17308

Packet padding initializes to 60-byte Ethernet minimum standards after reassembling fragmented packets, preventing packet payload corruption.

Installation

Issue ID

Description

NSPMGR-30562

Importing a Common Access Card (CAC) certificate while CAC is disabled deletes the trust store. This issue prevents the Manager Web UI from loading after a system restart.

NSPSNSR-16104

Baseboard Management Controller (BMC) firmware upgrades fail on hardware Sensors, leaving the BMC version unpatched.

Security fixes

Issue ID

Description

NSPMGR-30390

Third-party library dependencies, including Apache Tomcat and Log4j2, are updated to address reported security vulnerabilities.

NSPSNSR-17354

A file descriptor leak in the authentication gateway process causes process crashes and Sensor reboots after encountering open file limits.

Performance

Issue ID

Description

NSPMGR-30136

Selecting multiple IPS policies for editing causes the attack definition details pane to remain in a persistent loading state.

NSPSNSR-17473

Asynchronous session-cache writes are enabled by default to prevent inline packet processing delays during high session loads on virtual Sensors.

NSPMGR-30257

Exporting large lists of blocked file hashes to a CSV file fails due to background thread null pointer exceptions.

NSPSNSR-16677

Data telemetry aggregation in the Sensor performance alert module is corrected to display accurate packet buffer utilization in performance charts.

NSPSNSR-16091

Protocol session termination logic is hardened to prevent duplicate memory releases on session closure, preventing system crashes on stability setups.

NSPSNSR-13279

Hardens protocol session termination logic to prevent duplicate memory releases during session closure, preventing system crashes on stability setups.

NSPSNSR-16977

The Sensors experience a system crash or stop responding due to a double-free condition during session closure.

NSPSNSR-17231

Memory buffer leakage and packet drops occur during the reassembly of fragmented network packets.

NSPSNSR-16341

Active Layer-7 DDoS HTTP connection counters reset to zero after applying configuration updates.

Known issues

For a complete list of known issues, see Trellix IPS 11.1 Known Issues (KB96274). 

Upgrade and installation information

Release information

This section details the release date, build numbers and installation packages included in this release.

Release date: 10 November, 2026

Build information

  • IPS Manager: 11.1.7.186

  • Sensor: 11.1.5.186

Component

Build number

IPS Manager software

11.1.7.186

Signature Set

11.10.46.3

NS-series Sensor software
(NS9600, NS9500, NS7600, NS7500, NS3600, NS3200, NS3100)

11.1.5.186

Suricata Snort Engine

8.0.5

Trellix SSL Agent

1.0.5

Prerequisites

  • The Windows-based IPS Manager requires a minimum of 16 GB of memory and 300 GB of disk space.

  • Windows-based environments support Windows Server 2016, 2019, 2022, and 2025.

  • VMware ESX deployments require ESXi 7.0 Update 3 or ESXi 8.0 Update 3.

  • Hyper-V deployments requires Windows Server 2022 or later.

  • Linux-based Manager OVA requirements: Trellix OS 11.0.x, 8 logical CPU cores, 32 GB memory, 500 GB disk space, and 1 NIC.

  • Linux-based Manager qcow2 requirements: Trellix OS 11.0.x, 8 logical CPU cores, 20 GB memory, 500 GB disk space, and 1 NIC.

  • Nutanix server requirements for Trellix OS: AOS version 6.8.1, NCC Version 5.1.1, and LCM Version 3.1.1.

For more information, see Server requirements in Trellix Intrusion Prevention System 11.1.x Installation Guide.

Upgrade impact

Component

Impact

Trellix IPS Manager upgrade sequence

Upgrade the Manager to version 11.1.7.186 before you upgrade the Sensor to version 11.1.5.186. The Manager supports only TLS 1.2 ciphers for Manager-to-Sensor communication. If your Sensor uses TLS 1.0, upgrade the Sensor to a version that supports TLS 1.2 before you upgrade the Manager.

Manager timezone settings

Do not change the timestamp or timezone values of Trellix IPS Manager before you upgrade to the latest 11.1 version.

Physical appliances

Direct upgrades from MLOS 11.1 Update 9 to 11.1 Update 12 are not supported. You must migrate the physical appliance from MLOS to Trellix OS. For migration procedures, see Migrating from MLOS Manager Appliance to Trellix OS Manager Appliance.

Virtual instances

Direct upgrades and migrations from 11.1 Update 9 to 11.1 Update 12 are not supported on virtual machine instances. You must deploy a fresh instance of Trellix OS Manager and restore database tables by using All Table Backup. For more information, see Prepare for Trellix OS Manager fresh virtual machine instance deployment.

Trellix OS Manager direct upgrade restriction

Trellix OS IPS Manager does not support direct upgrades to 11.1.7.186 from versions 11.1.7.153 and 11.1.7.153.9. Contact support for assistance.

Manager browser access

Trellix IPS Manager no longer supports HTTP connections. Access the Manager UI only by using HTTPS. In the browser address bar, enter https://<hostname> or https://<host-IP> for IPv4, or https://[<IPv6 address>] for IPv6.

Supported upgrade path

The following table lists the supported upgrade paths to the current release. If your environment is running one of the versions listed in the table, follow the corresponding upgrade path to successfully upgrade.

Upgrade paths for Manager software versions

Current version

Upgrade path to 11.1.7.186

10.1.7.4 to 10.1.7.66.11 (Windows-based)

Upgrade directly to 11.1.7.186

11.1.7.3 to 11.1.7.168 (Windows-based)

Upgrade directly to 11.1.7.186

11.1.7.168 (Linux-based)

Upgrade directly to 11.1.7.186

Note

For all direct upgrades to 11.1.7.186 for Windows-based Manager, use the IPSM_1117186_setup.exe file.

Upgrade paths for Sensor software versions

Sensor models

Version

Upgrade path to 11.1.5.186

NS9600 (Standalone and stack)

11.1.5.113 to 11.1.5.167

Upgrade directly to 11.1.5.186

NS9500 (Standalone and stack)

10.1.5.3 to 10.1.5.204

Upgrade directly to 11.1.5.186

11.1.5.2 to 11.1.5.167

Upgrade directly to 11.1.5.186

NS-series (NS3100, NS3200)

10.1.5.64 to 10.1.5.202

Upgrade directly to 11.1.5.186

11.1.5.2 to 11.1.5.167

Upgrade directly to 11.1.5.186

NS7600

11.1.5.84 to 11.1.5.167

Upgrade directly to 11.1.5.186

NS7500

10.1.5.64 to 10.1.5.202

Upgrade directly to 11.1.5.186

11.1.5.2 to 11.1.5.167

Upgrade directly to 11.1.5.186

NS3600

11.1.5.84 to 11.1.5.167

Upgrade directly to 11.1.5.186

Deprecated items

Trellix IPS removes support for the following components:

  • Suricata Snort Support in NS3100 and NS3200 Models: Support for Suricata Snort rules and engines has been removed for these specific hardware models. Ensure signature sets and inspection configurations are updated accordingly before deploying this release.

Additional information