--- title: "Trellix Network Security configuration" slug: "trellix-network-security-configuration-1" tags: ["Reference", "Helix Enterprise", "Sec Ops and Analytics"] updated: 2026-09-05T14:07:16Z published: 2026-09-05T14:07:16Z canonical: "docs.trellix.com/trellix-network-security-configuration-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Trellix Network Security configuration Use these instructions to configure a Network Security appliance to send notifications to Helix. Prerequisites - The Network Security appliance must have an established connection to the Internet. - You must have admin access to the Network Security appliance. To configure rsyslog notifications: Use the Rsyslog Settings area on the Network Security **Settings** page to set up the default configuration for rsyslog notifications. 1. On the Network Security Web UI, select the **Settings** tab. 2. Select **Notifications** on the side bar. 3. Click the **rsyslog** column heading to display the Rsyslog Settings area in the **Settings** column. 4. Select **CEF** (Common Event Format) from the **Default format** drop-down menu. 5. Click **Apply Settings**. > [!NOTE] > Note > > : If you do not click **Apply Settings**, your changes will be lost. 6. In the Rsyslog Server Listing area, enter the name or IP address of the Communications Broker or syslog-enabled Cloud Collector in the **Name** box and click **Add Rsyslog Server**. 7. To apply the rsyslog server listing changes, click **Update**. Sending Network event logs to Helix In addition to Network Security alert notifications, you can send network event logs to Helix from a Trellix NX 2500 appliance. To configure the Network Security appliance using the CLI: 1. Configure an AWS endpoint: `> enable` `# configure terminal` `# tapsender VPC <hostname>` 2. Enable the `tapsender` process: `# tapsender enable`