--- title: "Troubleshooting" slug: "troubleshooting-30" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-08-19T18:44:20Z published: 2026-09-17T07:33:47Z canonical: "docs.trellix.com/troubleshooting-30" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting During normal in-line fail-open operation of the Sensor, Control port on the Sensor supplies power and a heartbeat packet to the fail-open switch. If the fail-open switch does not receive 6 heartbeat signals within its programmed interval of 300 milliseconds, the fail-open switch removes the Sensor from the data path, and moves into **Bypass Mode**, providing continuous data flow with little network interruption. While the fail-open switch is in bypass mode, traffic passes directly through it, bypassing the Sensor. When normal Sensor operation resumes, you may or may not need to manually re-enable the monitoring ports from the Manager interface, depending on the activity leading up to the Sensor's failure. The following section describes how to return the Sensor to in-line mode.