--- title: "Troubleshooting Azure Gateway Load Balancer integration issues" slug: "troubleshooting-azure-gateway-load-balancer-integration-issues-1" tags: ["Product Usage", "vIPS 11.1x", "vIPS"] updated: 2026-09-11T20:53:11Z published: 2026-09-11T20:53:11Z canonical: "docs.trellix.com/troubleshooting-azure-gateway-load-balancer-integration-issues-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting Azure Gateway Load Balancer integration issues ****Issues related to the display status of Azure Gateway Load Balancer in the IPS Manager**** If the status of Azure Gateway Load Balancer displays **Inactive**, it means there is a traffic inspection issue. You can follow the below steps to troubleshoot the display error in the Manager: - Login to the Azure portal and check if the Sensors are added to the **Backend pool**. - Check the health status of the Sensor. If the Sensor is unhealthy, perform the following: - If a new Sensor is added, you can wait for approximately 15 minutes and recheck the Sensor status. - Check if the **HealthCheck Protocol** is set to **TCP**. Also, confirm if the **HealthCheck Port** is set to **9001**. - Run the CLI `show cloud-gwlb status` and check if `HealthCheck` counters are increasing. If counters are increasing, there is no issue. The status of GWLB will display as **Active** in a few minutes. Otherwise, it signifies zero traffic flow due to the GWLB settings issue. - Run the CLI `show ingress-egress stat` to verify if the Sensor receives packets from GWLB. > [!NOTE] > Note > > - It is recommended to have an auto-scaling group so that if a Sensor becomes inactive, all other Sensors remain active. > - If the appropriate protocol (VXLAN), type, ports, and identifiers are not configured accurately during the GWLB deployment, you cannot modify these configurations after the deployment. To change the configuration after GWLB deployment, you can delete and reconfigure the backend pool configuration. ****User data issue**** - You cannot use the same user data as Probe while configuring the Azure Gateway Load Balancer. - If the user data is missing in the Sensor while deploying the Sensor, the Sensor won't be able to connect to the Manager. Therefore, the Manager dashboard fails to display the Sensor details. Hence, log in to the Azure portal and update user data in the Sensor. - If incorrect user data is updated, ensure the **Traffic Source** is configured as **GWLB**. In such cases, the Manager connects to the Sensor, but not the GWLB, causing a failure in the health check. For more information related to user data, see [Launch the Virtual IPS Sensor virtual machine](/network-and-platform/docs/launch-the-virtual-ips-sensor-virtual-machine-2). ****Security group issue**** To troubleshoot any security group issue between GWLB and the Sensor, you must first verify the inbound and outbound rules. Ensure the configured rules meet the recommended values. For more information, see [Requirements to deploy Trellix vIPS in GWLB-based Azure environment](/network-and-platform/docs/requirements-to-deploy-trellix-virtual-ips-with-azure-gateway-load-balancer).