--- title: "Turning the Sensor on and off" slug: "turning-the-sensor-on-and-off-1" tags: ["Hardware"] updated: 2026-09-17T10:37:47Z published: 2026-09-17T10:37:47Z canonical: "docs.trellix.com/turning-the-sensor-on-and-off-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Turning the Sensor on and off **Prerequisite:** Do not attempt to turn on the Sensor until you have installed the Sensor in a rack and made all the necessary network connections. **Steps:** 1. Connect the power cable to the Sensor power supply. 2. Connect the power cable to a power source. The Sensor has no power switch. The Sensor turns on as soon as one of its power cables is connected to a power source. Trellix recommends that you use the `shutdown` CLI command to halt the Sensor before turning it off. For more information on CLI commands, see the *CLI commands* section in the *Trellix Intrusion Prevention System Product Guide* for the specific Sensor software version you are running.