--- title: "Turning the Sensor on and off" slug: "turning-the-sensor-on-and-off-8" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:41Z published: 2026-09-17T09:43:41Z canonical: "docs.trellix.com/turning-the-sensor-on-and-off-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Turning the Sensor on and off > [!NOTE] > Note > > Do not attempt to turn on the Sensor until you have installed the Sensor in a rack and made all the necessary network connections. **Steps:** 1. Connect the power cable to the Sensor power inlet. 2. Connect the power cable to a power source. The Sensor has no power switch. The Sensor turns on as soon as one of its power cables is connected to a power source. Trellix recommends that you use the `shutdown`CLI command to halt the Sensor before turning it off. For more information on CLI commands, see the CLI commands section in Trellix Intrusion Prevention System Product Guide.