---
title: "Turning the Sensor on and off"
slug: "turning-the-sensor-on-and-off-9"
tags: ["Hardware", "IPS 11.1.x"]
updated: 2026-09-17T09:43:41Z
published: 2026-09-17T09:43:41Z
canonical: "docs.trellix.com/turning-the-sensor-on-and-off-9"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Turning the Sensor on and off
> [!NOTE]
> Note
>
> Do not attempt to turn on the Sensor until you have installed the Sensor in a rack and made all the necessary network connections.
**Steps:**
1. Connect the power cable to the Sensor power inlet.
2. Connect the power cable to a power source.
Trellix recommends that you use the `shutdown`CLI command to halt the Sensor before turning it off. For more information on CLI commands, see the CLI commands section in Trellix Intrusion Prevention System Product Guide.
3. Press the power button to turn on the Sensor.