--- title: "Two Port Link (link failure detect)" slug: "two-port-link-link-failure-detect" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-08-19T18:44:12Z published: 2026-09-17T07:33:47Z canonical: "docs.trellix.com/two-port-link-link-failure-detect" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Two Port Link (link failure detect) To manage link failure, detect on Net0/Net1 ports by performing the following steps: **Steps:** 1. Log in to the web interface of the 100G Active Fail-Open chassis. Use default credentials to access the web interface. 2. Go to, **AFO Configuration** → **Module ** → **Advanced Features**. ![GUID-CA5BA85B-A16E-4A39-BBB4-FC2E98DE9813-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-730e2c18-1750-47c8-16c7-35b38ccf8251.jpg?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 3. To disable, deselect the **Two Port Link**. By default, the **Two Port Link** is enabled. 4. Click **Commit**. 5. To save your configuration, select the **Save** tab. Click **Save**. **Result:** The **Two Port Link** is disabled.