--- title: "Update configuration for offline devices" slug: "update-configuration-for-offline-devices" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:58Z published: 2026-09-23T09:38:58Z canonical: "docs.trellix.com/update-configuration-for-offline-devices" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Update configuration for offline devices Follow this procedure for updating device configuration for offline devices: ## Task 1. Go to **Devices** → **** → **Global** → **Device Manager**. The **Device Manager** page is displayed. 2. Select the **Sensors** tab. From the list, select required Sensor. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-7BC72398-2EA2-49AD-9DEA-4F9EDD4860C9-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T05%3A19%3A35Z&se=2026-11-20T06%3A19%3A35Z&sr=c&sp=r&sig=cX%2BzI6bj1QnveGJUjJpL4cTvChZWe%2BTwGV9LRRAWFFk%3D) 3. Select **Export Sync File** from **Other Actions** drop-down. 4. Save the device configuration file to the location of your choice. 5. Copy the device configuration file to the TFTP server. 6. Connect to the device through CLI and configure the TFTP server IP. 7. Execute the loadconfiguration <device configuration filepath in the tftpserver><device configuration filename> command. 8. Once the device configuration file is copied on to the device, check with downloadstatus command in the CLI to get the status.