--- title: "Update configuration of a Sensor" slug: "update-configuration-of-a-sensor-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/update-configuration-of-a-sensor-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Update configuration of a Sensor Configuration updates refer to changes to device and interface/subinterface configurations, such as port configuration, non-standard ports, interface traffic types, and configuration changes to the Sensor. Signature updates have new and modified signatures that can apply to the attacks enforced in a chosen policy. Policy changes update the device in case of a newly applied policy or changes made to the current enforced policy. You can schedule configurations to be pushed to the Sensors from **Manager** → **** → **Trellix IPS Protection Status**. Select **Signature Sets** tab. The **Signature Sets** tab is displayed. Schedule the frequency at which the automatic deployment must occur by enabling the **Automatically Deploy New Signature Sets** option from **Automatic Deployment (Manager to Devices)**. The configurations are automatically deployed to Sensors from Manager based on schedule. All configurations in the **Policy** page that apply to your Sensors can also be manually pushed from **Devices** → **** → **Global** → **Device Manager**. Select **Sensors** tab. From the list, select the required Sensors. Select **Sync** (all Sensors in a domain) or **Devices** → **** → **Devices** → **** → **Deploy Pending Changes** (to a single Sensor) action. **Scheduled deployment** **Steps:** 1. Select **Manager** → **** → **Trellix IPS Protection Status**. Select **Signature Sets** tab. The **Signature Sets** tab is displayed. **Automatic Deployment (Manager to Devices)**![Automatic Deployment (Manager to Devices)](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e919137b-f0ae-cb69-1f5c-2b19910341b8.jpg?sv=2026-02-06&spr=https&st=2026-11-20T11%3A38%3A51Z&se=2026-11-20T12%3A38%3A51Z&sr=c&sp=r&sig=ClR8dSn6i7OjM7HEkW%2FvfNr%2B0ZAD3ltJ4xrO8tGym9c%3D) 2. Enable **Automatically Deploy New Signature Sets?** option. By default, it is disabled. - To push signature sets update to all Sensors immediately after it is downloaded to the Manager, select **Immediate (after download)** from **Deployment** drop-down. Click **Save** to setup the automatic deployment. - To configure the required interval of automatic deployment, select **Scheduled** from **Deployment** drop-down option. Choosing this provides, **When** option. - From the **When** option, customize the interval at which the deployment must occur. The following options are displayed in the drop-down list: - **Daily**: To deploy new signature sets daily. Set the time at which the deployment must occur. - **Weekly**: To deploy new signature sets weekly. Set the day of the week and time at which the deployment must occur. - **Custom**: To customize the interval at which the deployments must occur. The following options are displayed: - **Every**: Set the recurrence of time for the devices to poll the Manager. - **Between**: Set the time range at which the deployment must occur. 3. Click **Save**. **On-demand deployment** **Steps:** 1. Select **Devices** → **** → **Devices** → **** → **Deploy Pending Changes**. The **Deploy Pending Changes** page is displayed. **Deploy Pending Changes page**![Deploy Pending Changes page](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a7ec5bf4-94f5-e03a-b62d-d6c28c0e6912.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A38%3A51Z&se=2026-11-20T12%3A38%3A51Z&sr=c&sp=r&sig=ClR8dSn6i7OjM7HEkW%2FvfNr%2B0ZAD3ltJ4xrO8tGym9c%3D) > [!TIP] > Tip > > SSL key push failures can be caused by missing or corrupted certificates or an inconsistency in the shared secret key between the Sensor and Manager. Trellix Manager version 11.1.7.x and later displays the precise reason and resolution steps to address such SSL key push failures. 2. View the update information. If changes have been made, the **Configuration & Signature Set** column is checked by default. 3. Click **Deploy**. A pop-up window displays configuration download status.