--- title: "Update configuration of a Sensor" slug: "update-configuration-of-a-sensor" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:58Z published: 2026-09-23T09:38:58Z canonical: "docs.trellix.com/update-configuration-of-a-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Update configuration of a Sensor Configuration updates refer to changes to device and interface/subinterface configurations, such as port configuration, non-standard ports, interface traffic types, and configuration changes to the Sensor. Signature updates have new and modified signatures that can apply to the attacks enforced in a chosen policy. Policy changes update the device in case of a newly applied policy or changes made to the current enforced policy. You can schedule configurations to be pushed to the Sensors from **Manager** → **** → **Trellix IPS Protection Status**. Select **Signature Sets** tab. The **Signature Sets** tab is displayed. Schedule the frequency at which the automatic deployment must occur by enabling the **Automatically Deploy New Signature Sets** option from **Automatic Deployment (Manager to Devices)**. The configurations are automatically deployed to Sensors from Manager based on schedule. All configurations in the **Policy** page that apply to your Sensors can also be manually pushed from **Devices** → **** → **Global** → **Device Manager**. Select **Sensors** tab. From the list, select the required Sensors. Select **Sync** (all Sensors in a domain) or **Devices** → **** → **Devices** → **** → **Deploy Pending Changes** (to a single Sensor) action. **Scheduled deployment** 1. Select **Manager** → **** → **Trellix IPS Protection Status**. Select **Signature Sets** tab. The **Signature Sets** tab is displayed. Automatic Deployment (Manager to Devices) ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-7758344A-AEBD-49B5-B491-2E2DF85CBACC-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A54Z&se=2026-11-20T09%3A03%3A54Z&sr=c&sp=r&sig=cYudqBfe4k9cBRm9XdExleKNuN%2FPP1XsWU4XZTmY1Ow%3D) 2. Enable **Automatically Deploy New Signature Sets?** option. By default, it is disabled. - To push signature sets update to all Sensors immediately after it is downloaded to the Manager, select **Immediate (after download)** from **Deployment** drop-down. Click **Save** to setup the automatic deployment. - To configure the required interval of automatic deployment, select **Scheduled** from **Deployment** drop-down option. Choosing this provides, **When** option. - From the **When** option, customize the interval at which the deployment must occur. The following options are displayed in the drop-down list: - **Daily**: To deploy new signature sets daily. Set the time at which the deployment must occur. - **Weekly**: To deploy new signature sets weekly. Set the day of the week and time at which the deployment must occur. - **Custom**: To customize the interval at which the deployments must occur. The following options are displayed: - **Every**: Set the recurrence of time for the devices to poll the Manager. - **Between**: Set the time range at which the deployment must occur. 3. Click **Save**. **On-demand deployment** ## Task 1. Select **Devices** → **** → **Devices** → **** → **Deploy Pending Changes**. The **Deploy Pending Changes** page is displayed. Deploy Pending Changes page ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-DFD8EFF9-5824-4930-8E71-F2B2FF1A7A0F-low.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A03%3A54Z&se=2026-11-20T09%3A03%3A54Z&sr=c&sp=r&sig=cYudqBfe4k9cBRm9XdExleKNuN%2FPP1XsWU4XZTmY1Ow%3D) 2. View the update information. If changes have been made, the **Configuration & Signature Set** column is checked by default. 3. Click **Deploy**. A pop-up window displays configuration download status.