--- title: "Updating managed appliances using the CLI" slug: "updating-managed-appliances-using-the-cli-2" updated: 2026-08-25T21:18:10Z published: 2026-08-25T21:18:10Z canonical: "docs.trellix.com/updating-managed-appliances-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Updating managed appliances using the CLI Use the commands in this section to update the system image and guest images for managed appliances. ### Note This section provides basic commands used to update software images and download and install default guest images. For comprehensive information about using the CLI to update appliances, see the *System Administration Guide* or *Administration Guide* for your appliance or the *CLI Command Reference*. ### Note To update Intelligent Virtual Execution - Server appliances, use the `fenet update appliance` commands, as described in the *Distributed Network Security IVX Smart Grid Guide*. To install the latest system image and reboot the appliance: 1. Go to CLI configuration mode: ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Initiate the update process: ``` hostname (config) # fenet appliance manage upgrade ``` 3. View the progress: ``` hostname (config) # cmc execute appliance command "show fenet image status" ``` 4. Save your changes: ``` hostname (config) # cmc execute appliance command "write memory" ``` To download and install guest images: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Download the latest guest images: ``` hostname (config) # cmc execute appliance command "guest-images download" ``` 3. Verify that the guest images download is complete: ``` hostname (config) # cmc execute appliance command "show guest-images download" ``` 4. Install the guest images ``` hostname (config) # cmc execute appliance command "guest-images install" ``` 5. Verify that the guest images are installed properly: ``` hostname (config) # cmc execute appliance command "show guest-images" ``` 6. Save your changes: ``` hostname (config) # cmc execute appliance command "write memory" ``` ### Note It can take a long time to download guest images. If you need to cancel the download, use the `cmc execute appliance <applianceName> command "guest-images download cancel" `command. To resume the download, use `cmc execute appliance <applianceName> command "guest-images download resume"`command. ### Example This example installs the latest guest images on the FX-05 appliance. ``` hostname (config) # cmc execute appliance FX-05 command "guest-images install" ===========Appliance FX-05========== Execution was successful. Execution output: Found guest-images that can be installed Installing guest-images Terminating running work orders and virtual analysis subsystem ........ Restarting WebUI .... Installation complete! ``` :