--- title: "Updating the PX metadata selection" slug: "updating-the-px-metadata-selection-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/updating-the-px-metadata-selection-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Updating the PX metadata selection You can specify the protocols (from the list of supported Packet Capture protocols) whose metadata is received by your Network Detection and Response appliance. To update the Packet Capture metadata selection: 1. Log in to the Network Detection and Response Web UI. 2. Select **Menu > CONFIGURATION > PX Metadata**. 3. Click the **gear** icon (under the **Actions** column) corresponding to the PX appliance to select the appropriate protocols whose metadata is received. 4. Click **Update Metadata**. 5. In the **Packet Capture** **Login** screen, enter the administrator credentials for the Packet Capture appliance to authenticate the metadata selection, and then click **LOGIN & Update**. 6. In the **Metadata Selection** page, select the Packet Capture protocols corresponding to which the metadata is transferred to your Network Detection and Response appliance, and then click **UPDATE**. A confirmation message is displayed if the update is successful.