--- title: "Upgrade using the GUI" slug: "upgrade-using-the-gui-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/upgrade-using-the-gui-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Upgrade using the GUI **Pre-requisites:** Download the following firmware files from the download server for 1G copper, 1G fiber, or 10G fiber: - DTB - rootfs - ulmage - uboot You need to update the files one after the other. You must update the `uboot` file in the last. **Steps:** 1. Connect to the web interface of the fail-open kit. The **Info** configuration window appears. 2. Click on the **Rescue** tab. The **Rescue** configuration window appears. ![1-10-AFO.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ff04df80-98d1-8743-f66e-9c53331d176f.jpg?sv=2026-02-06&spr=https&st=2026-11-20T17%3A13%3A08Z&se=2026-11-20T18%3A13%3A08Z&sr=c&sp=r&sig=QyKdWKlZb7mdkUCpGUSlWNFcAio%2Bss7FTtcOg4hfFlk%3D) 3. Click **Choose File** and select the `DTB` file. 4. Click **Update**. > [!NOTE] > Note > > If you downgrade the firmware version, select the **Force** checkbox before you click **Update**. On successful update, you can see the **Operation Succeeded** message in the **Status** section of the web page. However, if the new image is same as the existing image, the **Status** section shows a **Operation Failed** message. 5. Repeat steps 3 and 4 for each of the `rootfs`, `ulmage`, and `uboot` files. After you update the `uboot` file, the device prompts for a reboot. Click **OK** for reboot. After successful reboot, the updated firmware is available on the fail-open kit.