--- title: "Upgrade using the GUI" slug: "upgrade-using-the-gui" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/upgrade-using-the-gui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Upgrade using the GUI **Prerequisite:** Download the latest firmware file from the download server for the Active Fail-Open kit. **Steps:** 1. Connect to the web interface of the fail-open kit. The **Info** configuration window appears. 2. Click on the **Rescue** tab. The **Rescue** configuration window appears. ![GUID-F925C248-3F19-4F75-9755-E22B3DE27412-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-77ab8880-014c-56c0-4f2c-d7664ead4a10.jpg?sv=2026-02-06&spr=https&st=2026-11-20T19%3A39%3A41Z&se=2026-11-20T20%3A39%3A41Z&sr=c&sp=r&sig=R9NbRXhauK%2BZMQpocIB9pQuroBX2SkVZTGCS2TiKLNk%3D) 3. Click **Choose File** and select the downloaded firmware file. 4. Click **Update**. > [!NOTE] > Note > > - If you downgrade the firmware version, select the `Force` checkbox before you click **Update**. > - The upgrade process takes about 3 minutes to complete. The firmware upgrade requires a reboot of the system for the changes to take effect. After the upgrade, you will be prompted to reboot. Click **OK** to reboot the system. > [!WARNING] > Important > > - Upgrade to firmware version 0.2.4.1 from any version older than 0.2.2.4 is not supported. If you are using AFO version older than 0.2.2.4, upgrade to version 0.2.2.4 first. Then, [upgrade from firmware version 0.2.2.4 to version 0.2.4.1](/network-and-platform/docs/upgrade-using-the-gui-1#upgrading-from-firmware-version-0224-to-version-0241). > - Downgrade from firmware version 0.2.4.1 to any older version is not supported. ### Upgrading from firmware version 0.2.2.4 to version 0.2.4.1 The process of upgrading from firmware version 0.2.2.4 to version 0.2.4.1 might include some additional steps as given below: 1. Repeat the firmware upgrade steps **1-4** as documented above and do a system reboot when prompted. On reboot, you might run into an `Internal Server Error` message over the browser. In such a scenario, do the following: 1. Open a separate browser window and access the fail-open switch web interface using the following format: `https://<IPv4 address of the fail-open switch>` A login window appears with an error message as displayed below- ![image1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a4c1273d-0962-7a2c-f6c3-284ae56af315.png?sv=2026-02-06&spr=https&st=2026-11-20T19%3A39%3A41Z&se=2026-11-20T20%3A39%3A41Z&sr=c&sp=r&sig=R9NbRXhauK%2BZMQpocIB9pQuroBX2SkVZTGCS2TiKLNk%3D) 2. Login using the user name and password you configured for accessing the fail-open kit web interface (Default is `Trellix00` and `Trellix00`). 3. Perform another upgrade using steps **1-3** (as mentioned above). 4. After you have selected the firmware file, you must select the `Force` checkbox before you click **Update**. ![image2-1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6ea61960-cf35-11d2-1f9a-c5e8c1021684.png?sv=2026-02-06&spr=https&st=2026-11-20T19%3A39%3A41Z&se=2026-11-20T20%3A39%3A41Z&sr=c&sp=r&sig=R9NbRXhauK%2BZMQpocIB9pQuroBX2SkVZTGCS2TiKLNk%3D) 5. The firmware upgrade requires a reboot of the system for the changes to take effect. After the upgrade, you will be prompted to reboot. Click **OK** to reboot the system. The usual login screen will appear upon reboot. Enter your credentials to access the fail-open switch web interface.