---
title: "Upgrade Virtual IPS Sensors in auto scaling group"
slug: "upgrade-virtual-ips-sensors-in-auto-scaling-group"
tags: ["Product Usage", "vIPS 10.1.10"]
updated: 2026-09-11T20:35:28Z
published: 2026-09-11T20:35:28Z
canonical: "docs.trellix.com/upgrade-virtual-ips-sensors-in-auto-scaling-group"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Upgrade Virtual IPS Sensors in auto scaling group
In case of an upgrade, a new launch configuration has to be created with the new Sensor AMI. The new launch configuration has to be associated with the auto scaling group. You can create a copy of the existing launch configuration, add the new Sensor AMI to the launch configuration and associate it to the auto scaling group.
The following section describes steps to upgrade Sensors in an auto scaling group so that there is no disruption to traffic inspection. The Sensors with the latest software version are deployed first. The Sensors with the older software version are deleted only after the new Sensors are deployed.
To upgrade the Virtual IPS Sensors launched in an auto scaling group, perform the following steps in AWS console:
**Copy the launch configuration**
1. In the
**Launch Configurations** page, select the launch configuration you want to create a copy of.
2. In the
**Details** tab, click
**Copy launch configuration**.
The **Review** tab for the launch configuration opens.
3. Click
**Edit AMI** and select the new AMI for the Sensor.
4. After selecting the new AMI, go to the
**Review** tab and click
**Create launch configuration**.
**Associate a new launch configuration**
1. In the
**Auto Scaling Groups** page, select the auto scaling group for which you want to update the launch configuration.
2. In the
**Details** tab, click
**Edit**.
3. Select the new launch configuration from the
**Launch Configuration** drop-down.
4. In the
**Desired** field, enter twice the number that was available in the previous launch configuration.
The maximum number has to be greater than or equal to the desired number.
5. In the
**Termination Policies**, select
**OldestInstance** first followed by the
**Default** policy.
6. Click
**Save**. The new launch configuration is linked to the auto scaling group.
Virtual IPS Sensors with the new Sensor software version is launched in the auto scaling group.
For more information on auto scaling groups, see the section Auto scaling of Sensors to improve traffic throughput in Trellix Virtual Intrusion Prevention System Product Guide.