--- title: "Uploading custom rules to managed Network Security appliances using the Web UI" slug: "uploading-custom-rules-to-managed-network-security-appliances-using-the-web-ui-3" updated: 2026-08-25T21:17:39Z published: 2026-08-25T21:17:39Z canonical: "docs.trellix.com/uploading-custom-rules-to-managed-network-security-appliances-using-the-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Uploading custom rules to managed Network Security appliances using the Web UI Use the **Appliance Settings: Custom Rules** page to upload custom rules for malware analysis to managed Network Security appliances. ### Important This page is displayed only when the custom rules feature is enabled using the Network Security CLI. To enable the feature, enter the` fenet security-content custom rule enable `command in the CLI configuration mode. To upload custom rules: 1. Click **Settings** and then select **Appliance Settings**. 2. Click **Custom Rules** in the sidebar. 3. (Optional) Use the controls at the top of the page to define the scope of the changes. ### Important If the scope includes appliances that are not running the minimum supported release, a message informs you that the changes were not applied to those appliances. :