--- title: "url-category ssl-categorization-trends enable" slug: "url-category-ssl-categorization-trends-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/url-category-ssl-categorization-trends-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # url-category ssl-categorization-trends enable Enables or disables the display of the SSL categorization trend statistics. When the SSL categorization trend feature is enabled on the Network Security appliance, the graphs of the collected traffic throughput statistics are displayed on the Dashboard of the Web UI. You can see which SSL traffic has been bypassed, whitelisted, uncategorized, or intercepted based on URL categories and category groups even when SSL interception is disabled on the appliance. When the SSL categorization trend feature is disabled on the Network Security appliance, the graphs of the collected traffic throughput statistics are not displayed. The feature is disabled by default and must be enabled. For details about how to configure the Network Security appliance to display the SSL categorization trend statistics, see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax `[no] url-category ssl-categorization-trends enable` ### Parameters no Disables the display of the collected traffic throughput statistics on the Dashboard. ### Examples The following example enables the display of the collected traffic throughput statistics on the Dashboard. ``` hostname (config) # url-category ssl-categorization-trends enable ``` The following example disables the display of the collected traffic throughput statistics on the Dashboard. ``` hostname (config) # no url-category ssl-categorization-trends enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3